TimePort PSE Replacement for StarTac PSE in MikBox Installation
Thread Starter
MBWorld Fanatic!
Joined: Dec 2004
Posts: 3,063
Likes: 26
From: Tampa, FL
2005 S500 4-Matic, 1978 450SL
TimePort PSE Replacement for StarTac PSE in MikBox Installation
Someone asked me the part number of the TimePort PSE with which I replaced my StarTac PSE in order to get caller ID readout on COMAND with a MikBox installation. I apologize for the delay in answering, and I have not been able to find the question again in the threads to answer directly - even after much searching.
The PSE I used was Q 682 0648; it was not an autosense model (one that could be used with a TimePort or a V60, SYN 9266A, Q 682 0754). If you get an autosense unit, please check with MIK to determine which version of the MikBox to order.
I have updated the technical publication for the MikBox installation in my car at http://www.benzworld.org/publications/pub.asp?id=317 to reflect this information.
Good luck to you.
The PSE I used was Q 682 0648; it was not an autosense model (one that could be used with a TimePort or a V60, SYN 9266A, Q 682 0754). If you get an autosense unit, please check with MIK to determine which version of the MikBox to order.
I have updated the technical publication for the MikBox installation in my car at http://www.benzworld.org/publications/pub.asp?id=317 to reflect this information.
Good luck to you.
Last edited by Skylaw; Jan 30, 2005 at 09:23 AM.
