94 C280
01-06-2004, 06:05 PM
#26
just about 70,000 miles, im a second owner.
issues:
i) hard shifting, especially between lower gears on a random basis (sometimes it happens, sometimes it doesnt)
ii) the problem described here (i dont know if its tranny related or not) https://mbworld.org/forums/showthrea...threadid=56407
how much does a ETC usually run and is it a job that i can do in my own garage?
issues:
i) hard shifting, especially between lower gears on a random basis (sometimes it happens, sometimes it doesnt)
ii) the problem described here (i dont know if its tranny related or not) https://mbworld.org/forums/showthrea...threadid=56407
how much does a ETC usually run and is it a job that i can do in my own garage?
01-06-2004, 10:28 PM
#27
Originally posted by ricerokets4life
i know i was just pointing out cuz i had that problem unfortunately. the tranny is showing problems also and its expected b/c it was manufactured in 12/97, before the updated tranny was introduced, as blackmercedes stated.
moral of the story: unless you can get a good deal on a 97-98 model c280, look for other w202s.
i know i was just pointing out cuz i had that problem unfortunately. the tranny is showing problems also and its expected b/c it was manufactured in 12/97, before the updated tranny was introduced, as blackmercedes stated.
moral of the story: unless you can get a good deal on a 97-98 model c280, look for other w202s.
01-13-2004, 04:06 AM
#29
Senior Member
Join Date: Nov 2003
Location: Seattle,WA
Posts: 314
Likes: 0
Received 1 Like
on
1 Post
744 C36 AMG,040 C43 AMG, CLK55 208, CLS55 IWC, CLK500 Rocketbunny widebody
Hey
I have a 1998 C43. I know this isnt a AMG forum but its a C. The 1998 C43 also hass the 722 tranny. I experience clunky shifts beetween 1-2 and 3-4. So i ovoously need updated parts and ECU. Can you shed some lite on this? I have heard people going to the dealership and the technicians act dumb on the subject.
I have a 1998 C43. I know this isnt a AMG forum but its a C. The 1998 C43 also hass the 722 tranny. I experience clunky shifts beetween 1-2 and 3-4. So i ovoously need updated parts and ECU. Can you shed some lite on this? I have heard people going to the dealership and the technicians act dumb on the subject.
