Just bridge the terminals inside ecu

 

I never did repair the ECU, but some owners have done this.
Connect the maf pin 5 to the ground and check the operation of the engine

 

so the pin 32 directly goes to pin ground brown wire so if i connect the pin 27 to groung will it be okay ?

 

I have repaired a few, the pin burns off behind the terminal to the pcb. Because the wiring looms shorts that ground wire to positive when the loom goes bad

 

Yes. It will work. But better to fix it at ecu

 

ohhh let me check the pins

 

i dont see any burn off marks !!

 

I need help please which ecu conformable with bosch ecu A018 545 24 32 / 0261 203 790

 

I have an issue that looks like similar to previous discussion but this here is difference:
016 545 29 30 [07] is not starting c200 of WDB2020-1FXXX after getting A016 545 55 32 [04] is starting with first cylinder off.
I can run using 2,3,4 kindly assist
Bahati

 

does your car have an mb immobilizer?