reseting combination
Almost a Member!
Joined: Sep 2004
Posts: 52
Likes: 0
From: The Great Northwest
KOMPRESSOR
By meanie
To reset the Service Engine light:
1. Turn ignition switch to # 2 ( run ) position.
2. Immediately press the odometer re-set switch twice within 1 second.
3. Turn ignition switch back to # 1 ( just key in ) position.
4. Press & Hold odometer button & turn key to # 2 position.
5. Hold for 10 seconds.
6. Your new service interval should now be displayed.
7. Release odometer button.
You're done.
To reset the Service Engine light:
1. Turn ignition switch to # 2 ( run ) position.
2. Immediately press the odometer re-set switch twice within 1 second.
3. Turn ignition switch back to # 1 ( just key in ) position.
4. Press & Hold odometer button & turn key to # 2 position.
5. Hold for 10 seconds.
6. Your new service interval should now be displayed.
7. Release odometer button.
You're done.
