MY W202, 1996 C280 CRANKS BUT CAN'T START, NO CURRENT TO IGNITION COILS
Thread Starter
Newbie
Joined: Jul 2023
Posts: 1
Likes: 0
1996 C280
MY W202, 1996 C280 CRANKS BUT CAN'T START, NO CURRENT TO IGNITION COILS
My 1996 W202, C280 (in-line 6 Cylinders), I drove home, refused to start the next day. I thought it was fuel, but there is gasoline in the Tank. The red / green lights on the inside mirror are not flashing.
My fuel pump comes on (hears the sound). I checked, I have 6 volts when ignition is on, at the injector nozzle electrical plug-in. But I realize there are no sparks coming from the Spark Plugs. And this is not an Ignition Coil problem, but the issue here is that there are to current / voltage to the 3 Ignition Coils.
My enquiry is; what gives the Ignition Coil current? I cannot tell if my OVP Relay is good, is there any known check to confirm the status?
But please, I want to know how current gets (flows) to the Ignition Coil. I would appreciate an electrical wiring of the Battery current flow to the Engine & components.
Thanks.
Ejike (ejik3@yahoo.com)
My fuel pump comes on (hears the sound). I checked, I have 6 volts when ignition is on, at the injector nozzle electrical plug-in. But I realize there are no sparks coming from the Spark Plugs. And this is not an Ignition Coil problem, but the issue here is that there are to current / voltage to the 3 Ignition Coils.
My enquiry is; what gives the Ignition Coil current? I cannot tell if my OVP Relay is good, is there any known check to confirm the status?
But please, I want to know how current gets (flows) to the Ignition Coil. I would appreciate an electrical wiring of the Battery current flow to the Engine & components.
Thanks.
Ejike (ejik3@yahoo.com)
