W203/CL203 Suspension (Shocks/Springs/Sway Bars) Discussion/Upgrade Thread
#1226
i went to walmart and bought a air impact gun and got all the bolts off easy when i was installing my springs.. it was like 25 bucks but you will need an air compressor to use it idk about the electric ones.. prolly not strong enough
#1228
i have the same problem. my rear left side is rubbing on the tire. im thinking it either has to be the shock or the coil. so im thinkin about just replacing both. probably getting the oem springs and bilstein sporty heavy duty shocks. anybody have any experience with this or any thoughts? and anywhere to get the coil springs besides the dealer that dont lower the vehicle? also been trying to search but is there a diy on here?
#1229
![smash](https://mbworld.org/forums/images/smilies/smashfreak.gif)
#1230
dont worry about it cuz ..its solved yo i gotta ask u... i notice that my c230 has kind of bad throttle response..how mush in a scale of 1-10 does the sprint booster help ???
#1231
MBWorld Fanatic!
Sprint booster amplifies the signal. So if you are doing 1/4 throttle it will amplify it to around maybe 2/4.
Or you can convert it to cable.![naughty](https://mbworld.org/forums/images/smilies/naughty.gif)
Also since our transmissions have Adaptations you can reset it which improves throttle response.
Search for "Sneaky ECU Reset"
Or you can convert it to cable.
![naughty](https://mbworld.org/forums/images/smilies/naughty.gif)
Also since our transmissions have Adaptations you can reset it which improves throttle response.
Search for "Sneaky ECU Reset"
#1232
Super Moderator
![](https://staticssl.ibsrv.net/autocomm/Content/MB/mbwambassador2.gif)
Guys - I think that the left is always first to rub - but if the car is sitting higher right than left the RHS shock has probably failed on the rebound.
#1233
MBWorld Fanatic!
This happened to my car and the dealership replaced the left rear shock absorber under warranty. No issues since. This was at around 35k miles. I'm at 57300 now.
#1235
karo so ur saying mercedes uses electronicly controlled throttle??
#1236
MBWorld Fanatic!
Yup, it's called "drive-by-wire" rather than the good old fashion cable.
http://www.sprintboostersales.com/sp...?make=mercedes
http://www.sprintboostersales.com/sp...?make=mercedes
SprintBooster sends an improved signal to the ETC (Electronic Throttle Control) which is amplified or "boosted" so that throttle is noticeably more responsive throughout the entire rpm range.
#1237
MBWorld Fanatic!
I know a lot of people use sprint booster but I myself wouldn't trust it. You never know what can happen.
If you are going to spend money to make you car into a track car then I would suggest you spend the money and convert the throttle to "cable".
Edit
By the way I was reading a pretty interesting article on the Autocross and it seems like most people say "Manual" is the best but a lot of pros say that "automatic" is the best. They change the torque converter and change some transmission parts and it's much better than a manual because when you let go of the gas the car tremendously slows down so you don't have to worry about down shifting "manual" and just focus on the course.
Jayton have you heard anything like this?
If you are going to spend money to make you car into a track car then I would suggest you spend the money and convert the throttle to "cable".
Edit
By the way I was reading a pretty interesting article on the Autocross and it seems like most people say "Manual" is the best but a lot of pros say that "automatic" is the best. They change the torque converter and change some transmission parts and it's much better than a manual because when you let go of the gas the car tremendously slows down so you don't have to worry about down shifting "manual" and just focus on the course.
Jayton have you heard anything like this?
Last edited by W203E35; 08-01-2009 at 08:22 PM.
#1238
Need help on Eibach Sways
I was installing a set of eibach sways today and find that the endlinks on doesn't fit on the eibach sways. The sway bar had a much smaller hole then the end link. I got the eibach set 2564.320. Please tell me I got the correct bars. This is being put onto a C32 AMG.
#1239
sorry to tell u bro haaha but u got the wrong sway u should gone with
h&r's and theyre adjustable..but u shoulda done sum research first to see what endlink hole size ur car haz .
h&r's and theyre adjustable..but u shoulda done sum research first to see what endlink hole size ur car haz .
#1240
I know a lot of people use sprint booster but I myself wouldn't trust it. You never know what can happen.
If you are going to spend money to make you car into a track car then I would suggest you spend the money and convert the throttle to "cable".
Edit
By the way I was reading a pretty interesting article on the Autocross and it seems like most people say "Manual" is the best but a lot of pros say that "automatic" is the best. They change the torque converter and change some transmission parts and it's much better than a manual because when you let go of the gas the car tremendously slows down so you don't have to worry about down shifting "manual" and just focus on the course.
Jayton have you heard anything like this?
If you are going to spend money to make you car into a track car then I would suggest you spend the money and convert the throttle to "cable".
Edit
By the way I was reading a pretty interesting article on the Autocross and it seems like most people say "Manual" is the best but a lot of pros say that "automatic" is the best. They change the torque converter and change some transmission parts and it's much better than a manual because when you let go of the gas the car tremendously slows down so you don't have to worry about down shifting "manual" and just focus on the course.
Jayton have you heard anything like this?
yea true i think il try to make it cable ...and no i havent heard about this automatic jaba jaba..i think its bull ..no offense...but i was just planning on getting a quaife 6-spd sequiental racing tranny and keeping it simple..yaa digggg
#1242
MBworld Guru
Join Date: Apr 2002
Location: Diamond Bar, CA
Posts: 22,007
Likes: 0
Received 6 Likes
on
6 Posts
white and whiter
The Eibach sway is also adjustable. 10mm endlink hole can be just drilled out to 12mm. it doesn't make any difference on how it's adjustable.
#1244
MBWorld Fanatic!
Hey non taken. I have never been to an autocross so I dont know much. It was just an article that I saw.
Here is what I read.
"Many racers believe they need a manual transmission, if they road race or autocross their car. Road racers downshift before entering the turn. They use the engine's compression to help in braking the car. When the driver gets back on the power, with a manual transmission, he is in the correct torque range and will have instant acceleration. On a tight slalom course, an argument can be made for using an automatic tranny. You put it in one gear and just concentrate on not hitting any cones.
California Performance Transmissions' Lancaster disagrees. He said, "Downshift and upshift timing are non-issues, allowing the driver to concentrate on proper vehicle placement when entering and exiting turns, which can be accomplished without lifting from the throttle in most instances. A properly designed torque converter, such as one of our Heavy-Duty Mega-Torque units, will also provide additional torque multiplication that is not available with manual transmissions. And California Performance Transmission has pioneered overdrive four-speed transmission swaps and can provide units behind virtually any engine/chassis combination."
But Keisler told us, "We have seen a significant number of swaps the other way, from automatic overdrive to manual overdrive transmissions. In addition to the benefits in weight and heat reduction, many drivers just believe, as we do, that a stick is just more fun to drive.""
http://www.kitcarmag.com/techarticle...ech/index.html
Here is what I read.
"Many racers believe they need a manual transmission, if they road race or autocross their car. Road racers downshift before entering the turn. They use the engine's compression to help in braking the car. When the driver gets back on the power, with a manual transmission, he is in the correct torque range and will have instant acceleration. On a tight slalom course, an argument can be made for using an automatic tranny. You put it in one gear and just concentrate on not hitting any cones.
California Performance Transmissions' Lancaster disagrees. He said, "Downshift and upshift timing are non-issues, allowing the driver to concentrate on proper vehicle placement when entering and exiting turns, which can be accomplished without lifting from the throttle in most instances. A properly designed torque converter, such as one of our Heavy-Duty Mega-Torque units, will also provide additional torque multiplication that is not available with manual transmissions. And California Performance Transmission has pioneered overdrive four-speed transmission swaps and can provide units behind virtually any engine/chassis combination."
But Keisler told us, "We have seen a significant number of swaps the other way, from automatic overdrive to manual overdrive transmissions. In addition to the benefits in weight and heat reduction, many drivers just believe, as we do, that a stick is just more fun to drive.""
http://www.kitcarmag.com/techarticle...ech/index.html
#1247
Out Of Control!!
![beat](https://mbworld.org/forums/images/smilies/beat.gif)
That's a classic - showing your own stupidity is never the best way to try to give a smartass answer.
#1248
MBWorld Fanatic!
Join Date: Sep 2008
Location: SoCal
Posts: 1,174
Likes: 0
Received 1 Like
on
1 Post
...a panty dropper...
After having the sprintbooster I would never want to go without. It makes the car a lot more fun. No HP boost, just quicker throttle response. I would rate it a 10 since I wouldnt drive without it now. It is a def mod which you will not regret!!
#1249
MBWorld Fanatic!
Join Date: Dec 2008
Location: Royal Oak, Michigan
Posts: 1,458
Likes: 0
Received 3 Likes
on
3 Posts
Moped
![Talking](https://mbworld.org/forums/images/icons/icon10.gif)
k. i wanna sell my h&r springs that i used for a few thousand miles. still have the box stickers paper works. first 150 LOCAL gets the set. thanks for looking!
SOCAL BY THE WAY!!! and these have not been cut. no pics yet. they will be off tuesday night.
EDIT: should fit all c-class and clk(w209)
SOCAL BY THE WAY!!! and these have not been cut. no pics yet. they will be off tuesday night.
EDIT: should fit all c-class and clk(w209)
Last edited by skittles; 08-02-2009 at 11:00 PM.
#1250
Junior Member
Join Date: Jan 2004
Location: Winnipeg, Canada
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
2002 C230 Coupe
Suspension rattle (even after replacing bushings/ball joints)
Hey guys,
I'm kind of stumped on this one. I had a noisey rattling suspension, and there was some play in the wheels (left to right) when it was jacked up. This indicated ball joints, so I went ahead and replaced all 4 thrust arms (left/right lower, left right upper) which gave me new ball joints and new bushings.
The suspension overall is better, and eliminated the left-right play in the wheels, however there still is rattling when I go over some bigger bumps. Anyone got any ideas as to what I should check next? Shock assembly? Wheel bearings maybe? Would sway bar end-links cause this? Sway-bar bushings? What's the diagnostic procedure to verify which of these things are the cause?
Any help or advice would be appreciated!
Rich...
I'm kind of stumped on this one. I had a noisey rattling suspension, and there was some play in the wheels (left to right) when it was jacked up. This indicated ball joints, so I went ahead and replaced all 4 thrust arms (left/right lower, left right upper) which gave me new ball joints and new bushings.
The suspension overall is better, and eliminated the left-right play in the wheels, however there still is rattling when I go over some bigger bumps. Anyone got any ideas as to what I should check next? Shock assembly? Wheel bearings maybe? Would sway bar end-links cause this? Sway-bar bushings? What's the diagnostic procedure to verify which of these things are the cause?
Any help or advice would be appreciated!
Rich...