Interests in a group buy of the m111 Renntech ECU mod?
#51
MBWorld Fanatic!
Originally posted by amgme
the key word is "selected". is there anything specific that states which selected items are for off-road use only?
the key word is "selected". is there anything specific that states which selected items are for off-road use only?
#52
Super Member
Thread Starter
Join Date: Nov 2001
Location: Jacksonville Florida
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
w203 c230K 2002
Buellwinkle you are such a loser. I'll be takening orders for the pulley and chip combo. Why do you work so hard to slam Renntech and now me? You have never owned or ordered a product from me, never driven one, never tested one. I don't get it.
For everyone interested I have the ECU installed as of today, I will post more information as I get a chance to test it out. Renntech will also be finishing some work on the intercooler over the next two weeks. I posted a Dyno from a Renntech car on this board that records a better gain then claimed by Renntech's web site. 224 HP and 248 ft/torque that was with a air filter btw. I have explained before that they claim a min gains. it's always better to get more than claimed rather than less .
I will be sure to let those that are intersted know more on the priceing, I meet with the Renntech guys tomarrow. I will also get a chance to drive in an E55 they just finished super charging and chipping.
For everyone interested I have the ECU installed as of today, I will post more information as I get a chance to test it out. Renntech will also be finishing some work on the intercooler over the next two weeks. I posted a Dyno from a Renntech car on this board that records a better gain then claimed by Renntech's web site. 224 HP and 248 ft/torque that was with a air filter btw. I have explained before that they claim a min gains. it's always better to get more than claimed rather than less .
I will be sure to let those that are intersted know more on the priceing, I meet with the Renntech guys tomarrow. I will also get a chance to drive in an E55 they just finished super charging and chipping.
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
Last edited by renncpe; 08-07-2002 at 10:59 PM.
#53
MBWorld Fanatic!
See, there's that tension again. I can almost see the twitch when he hears, Buellwinkle. Randy, I can't help it, your so easy to annoy.
224HP, hmmm, just a few less than Kleemann's 232HP, must be the lighter weight, but wait they have a chip so you can reach the same HP as the Kleemann pulley. Hmm, what if you combine a chip with Kleemann. Choices, choice, choices.
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
#54
Super Member
Thread Starter
Join Date: Nov 2001
Location: Jacksonville Florida
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
w203 c230K 2002
I think that 1/4 mile times will be better to judge the cars by, than dynos are. why don't you make some runs and post your time strips. I will do the same, them we don't have to worry about matching up dyno's
#55
MBWorld Fanatic!
Yes, that would be ideal, a dead stock C230 Coupe with a Renntech pulley vs. one with the Kleemann pulley vs. one with an ASP pulley. Now where could we find that combination in the same area to pull it off. Timeslips wouldn't be fair because you have lots of variations day to day and track to track. They have to be side by side, on the same track. There's one by me at Carlsbad Raceway in So Cal. The other problem is drag racing skills and reaction time, too large a variable. What may work better is side by side dyno runs on the same dyno, same car, same day, alternate pulleys. That way there's no variation, no one car had more hp to begin with, no gear, transmission, wheel, muffler, intake differences. I'm up for Evosport, site sponsor if someone wants to 1) sponsor it (dyno time and labor), 2) provide the gear. That would probably settle the question once and for all. The trouble I see is that the high priced tuners have to much to lose and little to gain to take on such a challange. What if ASP was 10hp better than Renntech, that wouldn't do much for Renntech's ego. Up for it Randy, Brandon, you must have the connections to pull it off.
#56
Super Member
Join Date: Nov 2001
Location: San Diego
Posts: 557
Likes: 0
Received 1 Like
on
1 Post
99' SLK 230 & 01' CLK 430
What may work better is side by side dyno runs on the same dyno, same car, same day, alternate pulleys. That way there's no variation, no one car had more hp to begin with, no gear, transmission, wheel, muffler, intake differences
#57
I'd definately like to see this happen! It'd settle all the debates about which pulley is the best it terms of performance. Then all that would be left, would be reliability in the long run.
#60
Member
Join Date: Aug 2002
Location: San Francisco
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
88 BMW M3, 11 BMW M3 Vert, 04 Porsche GT3
Hehe
I am a newbie with MB but have had Porches for a while.... i'd be happy to be an anonymous sponsor... let's do it... the side by side test is a great idea... hate to see ppl so bent out of shape... com'on guys... these are only cars.... who cares... it's not like it's religion or anythign....
#61
MBWorld Fanatic!
Why not contact European Car mag and have them supervise/write it up? Then there'd be a judge on this grudge match! Plus, I'm willing to bet they have access to Dyno and timing gear for the match!
P
P
#62
Originally posted by renncpe
You are accussing them of fraud! You will not answer directly how you would test their product. You got two diffrent dyno's; through out the one you did not like? Why don't you buy the Mod's and sue if they don't work? Why put it off on anybody else.
You are accussing them of fraud! You will not answer directly how you would test their product. You got two diffrent dyno's; through out the one you did not like? Why don't you buy the Mod's and sue if they don't work? Why put it off on anybody else.
90% of North America uses a DYNOJET...as long as you do a BEFORE and AFTER using the SAME DYNOJET (not hard to do since you are a friggin' company) you can make a fair BEFORE AND AFTER COMPARISON.
Here, I'll tell you how to do it. Strap your C230K on the dyno with stock software. Do 5 dyno runs and pick the 3rd best run (Median run).
Then let the car cool and install your new software.
Now do 5 more runs and pick the 3rd best run (Median run).
Finally, OVERLAY the 3rd best run STOCK and the 3rd best run AFTER the chip. (easy to do with Dynojet software).
Now you have a graph that shows BEFORE AND AFTER. EASY!!!
This is will give potential purchasers a general idea of what to expect. This would take a MAXIMUM of 2 hours of dyno time. AT MOST, this would cost $200 US (that's if you are getting ripped off).
You'd make all that back and more by selling one chip!!!
If you have a problem with Buellwinkle, present the dyno graphs and shut him up. Otherwise, he has every right to be skeptical!
#63
Super Member
Re: Hehe
Originally posted by inflectionpt
I am a newbie with MB but have had Porches for a while.... i'd be happy to be an anonymous sponsor... let's do it... the side by side test is a great idea... hate to see ppl so bent out of shape... com'on guys... these are only cars.... who cares... it's not like it's religion or anythign....
I am a newbie with MB but have had Porches for a while.... i'd be happy to be an anonymous sponsor... let's do it... the side by side test is a great idea... hate to see ppl so bent out of shape... com'on guys... these are only cars.... who cares... it's not like it's religion or anythign....
#64
But that's just it...Buellwinkle does deserve a lot of credit for what he did.
If you've been in the market long enough, you know that most pulley kits go for around $100-$200 US for a complete kit. These kits are perfectly balanced and are top quality.
For someone to come in and ask for $1000+ for an alloy pulley is RIDICULOUS! They're just trying to rip you off because you drive a Mercedes. To be honest, most of the board members don't have any technical knowledge about cars and the way they work. They are tricked into believing all the marketing crap that is thrown at them by big name manufacturers. NOT EVERYONE is fooled by this, and there are some people on this board that know a lot of technical information.
I just hate to see people getting ripped off. I know it's not my money, and I really shouldn't give a *****. But I look at it this way...if manufacturers are allowed to rip people off when pricing their products, who's going to stop them? It'll just get worse and worse.
They try to justify the ridiculous cost of the pulley by saying "Look at how much HP you get from this mod, it's worth it". What a silly way to look at things. If the car was turbocharged, a MANUAL boost controller would cost $50US and make WAY more power than this stupid pulley. But you don't see people charging $1000 for Manual Boost Controllers that are made of parts that cost only $20 from Home Depot! If they did that, their market would be up in arms!!!
Of course, when it comes to Mercedes owners, they see fit to rape people up the *** when pricing their products.
I see this same garbage with BMW parts as well. The "Exhausts" for the E46 BMW M3 cost $1200 - $2000. The only problem is that this "Exhaust" is only a friggin' MUFFLER! How they can justify that cost is beyond me! The problem I have is that I'm probably going to have to pay that price because an exhaust is not as easy to copy as a pulley. Sure, I could get a "Custom Exhaust" made, but it'd probably sound and look like gargage.
Anyway, enough venting for me.
If you've been in the market long enough, you know that most pulley kits go for around $100-$200 US for a complete kit. These kits are perfectly balanced and are top quality.
For someone to come in and ask for $1000+ for an alloy pulley is RIDICULOUS! They're just trying to rip you off because you drive a Mercedes. To be honest, most of the board members don't have any technical knowledge about cars and the way they work. They are tricked into believing all the marketing crap that is thrown at them by big name manufacturers. NOT EVERYONE is fooled by this, and there are some people on this board that know a lot of technical information.
I just hate to see people getting ripped off. I know it's not my money, and I really shouldn't give a *****. But I look at it this way...if manufacturers are allowed to rip people off when pricing their products, who's going to stop them? It'll just get worse and worse.
They try to justify the ridiculous cost of the pulley by saying "Look at how much HP you get from this mod, it's worth it". What a silly way to look at things. If the car was turbocharged, a MANUAL boost controller would cost $50US and make WAY more power than this stupid pulley. But you don't see people charging $1000 for Manual Boost Controllers that are made of parts that cost only $20 from Home Depot! If they did that, their market would be up in arms!!!
Of course, when it comes to Mercedes owners, they see fit to rape people up the *** when pricing their products.
I see this same garbage with BMW parts as well. The "Exhausts" for the E46 BMW M3 cost $1200 - $2000. The only problem is that this "Exhaust" is only a friggin' MUFFLER! How they can justify that cost is beyond me! The problem I have is that I'm probably going to have to pay that price because an exhaust is not as easy to copy as a pulley. Sure, I could get a "Custom Exhaust" made, but it'd probably sound and look like gargage.
Anyway, enough venting for me.
#65
Super Member
KJ, my point is that Buellwinkle relied 100% on the technical knowledge of others to get where he is today with the pulley. If you read his posts you will see that his level of understanding is surface at best. In one post he admitting not knowing what a stretch bolt was. The sad thing is a true stretch bolt should only be used once, I wonder how many times he has his on and off. Well, if the pulley comes flying off we'll know why!
What you pay for in these higher prices is the R&D of a limited market product on a more expensive platform. In the case of the 'muffler' take a look at the quality of build between the two (granted 2K is really steep) and that will explain some of the cost. As far as the pulley, for every 1 MB pulley there are 250 ricer pulleys made so that is factor too. Lots goes into the pricing, including profits. In general MB owners are wealthier than ricers so that leads to the price the traffic will bear.
What you pay for in these higher prices is the R&D of a limited market product on a more expensive platform. In the case of the 'muffler' take a look at the quality of build between the two (granted 2K is really steep) and that will explain some of the cost. As far as the pulley, for every 1 MB pulley there are 250 ricer pulleys made so that is factor too. Lots goes into the pricing, including profits. In general MB owners are wealthier than ricers so that leads to the price the traffic will bear.
#67
MBWorld Fanatic!
Exactly, that's what the forum is, a way for the world of enthusiast to communicate and make better products at affordable prices. If I'm seen a idiot for helping some people out in getting a pulley for 1/4th the price of what some tuners charge then too bad. If people don't like me getting the same exact air filter as some tuners sell for twice the price then too bad. In the ideal world, MBs would be treated the same as Audi, BMWs and other brands and have a more competitive tuner market. There is no reason that if a company makes products for other markets that they can't also make a similar part for the C-Coupe even if they don't have a German accent. I know my tactics upset 3 kinds of people, the tuners that now have to compete with the lower priced products, 2) the people that already spent the higher money and have the need to justify their high ticket items, 3) the brand aware consumer where money is no object and feels that the more they spend the better the product. But to those thinking about getting any pulley look what I have done for you, I not only provided a very viable source for a $350 alloy pulley but have actually forced some tuners to re-evaluate their pricing and come up with these offers to forums members. So if you ever wanted a Renntech or Kleemann pulley here's your chance to get them at lower prices that would not have likely been offered if not for the increased competition. And I did it for my own car and for the forum and not for my profit, I have no affiliation with ASP or ITG or any other car parts manufacturer or reseller.
I did e-mail magazines a while ago and car shows with my dyno results and an explanation of the mod and how several tuners have done this and never received a reply so if you know a magazine willing to do a shootout then great.
I see we have a sponsor, my car has the ASP pulley and ITG filter that can be replaced in 5 minutes with a factory filter. Also it's a 6 spd so it makes it quicker to replace the pulley. All we need now is loaner pulleys from Renntech and whoever else wants to enter the challange. If someone can get back to me with those other pulleys I'll ask Vadim if he's willing to participate and how much it will cost per pulley tested (labor to install plus dyno for each).
I did e-mail magazines a while ago and car shows with my dyno results and an explanation of the mod and how several tuners have done this and never received a reply so if you know a magazine willing to do a shootout then great.
I see we have a sponsor, my car has the ASP pulley and ITG filter that can be replaced in 5 minutes with a factory filter. Also it's a 6 spd so it makes it quicker to replace the pulley. All we need now is loaner pulleys from Renntech and whoever else wants to enter the challange. If someone can get back to me with those other pulleys I'll ask Vadim if he's willing to participate and how much it will cost per pulley tested (labor to install plus dyno for each).
#68
MBWorld Fanatic!
Originally posted by mdp c230k
KJ, my point is that Buellwinkle relied 100% on the technical knowledge of others to get where he is today with the pulley. If you read his posts you will see that his level of understanding is surface at best. In one post he admitting not knowing what a stretch bolt was. The sad thing is a true stretch bolt should only be used once, I wonder how many times he has his on and off. Well, if the pulley comes flying off we'll know why!
KJ, my point is that Buellwinkle relied 100% on the technical knowledge of others to get where he is today with the pulley. If you read his posts you will see that his level of understanding is surface at best. In one post he admitting not knowing what a stretch bolt was. The sad thing is a true stretch bolt should only be used once, I wonder how many times he has his on and off. Well, if the pulley comes flying off we'll know why!
As for R&D, hmm, are you saying that ASP and I didn't do any R&D and we copied someone? Yes we copied the factory pulley and made it bigger. I made paper templates of the area and used that to estimate how big the pulley can be. I used simple math to calculated belt length. I was dead on for the belt. I was off by 1/16" on the pulley and had to be shaved down. I've never even seen another pulley (except the DSR S/C pulley) until the pulley that's in my car now was made. I did have measurements for a Vaeth pulley but that wasn't correct because it was for an older SLK230 and the info proved useless. We probably did as much R&D as anybody else. Heck they even tried 3 steel ring type pulleys and gave up on it. As a point of reference, I started discussions with ASP on February 5th, way before many of these tuners had a product to copy. I know it's hard to believe that ASP can sell a low volume product to us spoiled MB people willing to pay anything but it's being done. I'm sorry but there's really is no excuse for what some tuners charge for their products for our cars. It's a case of I don't sell enough to justify the R&D but they charge to much to sell many.
#69
Senior Member
Join Date: Feb 2002
Location: Dexter, Michigan, USA
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
2002 C230k
Originally posted by KJ-TypeR
I see this same garbage with BMW parts as well. The "Exhausts" for the E46 BMW M3 cost $1200 - $2000. The only problem is that this "Exhaust" is only a friggin' MUFFLER! How they can justify that cost is beyond me! The problem I have is that I'm probably going to have to pay that price because an exhaust is not as easy to copy as a pulley. Sure, I could get a "Custom Exhaust" made, but it'd probably sound and look like gargage.
I see this same garbage with BMW parts as well. The "Exhausts" for the E46 BMW M3 cost $1200 - $2000. The only problem is that this "Exhaust" is only a friggin' MUFFLER! How they can justify that cost is beyond me! The problem I have is that I'm probably going to have to pay that price because an exhaust is not as easy to copy as a pulley. Sure, I could get a "Custom Exhaust" made, but it'd probably sound and look like gargage.
You don't want to spend the cash on the part designed/developed for the car, but you don't want to buy a generic (cheaper) system because it wasn't developed for the car...
This isn't to say I think $2000 for an exhaust isn't a lot of money, but it's not a whole lot more than we charge OEMs for custom built systems. And depending on how much development they actually do, the test equipment used is NOT cheap. Heck, we pay over $10,000 per year just to license some of the software we use...
#70
MBWorld Fanatic!
Originally posted by Spyke
As someone who still does a bit of exhaust design at his real job, this paragraph strikes me as rather humorous.
As someone who still does a bit of exhaust design at his real job, this paragraph strikes me as rather humorous.
#71
Former Vendor of MBWorld
Originally posted by Buellwinkle
OK, humor us with a reasonable cost muffler that fits our car as a bolt on will have a nice sound like Remus. Do it as a group buy for the forum to offset R&D costs. I would buy it. I would love a Remus muffler but I can't get myself to spend $600 on just a muffler. Here's a starting point...
OK, humor us with a reasonable cost muffler that fits our car as a bolt on will have a nice sound like Remus. Do it as a group buy for the forum to offset R&D costs. I would buy it. I would love a Remus muffler but I can't get myself to spend $600 on just a muffler. Here's a starting point...
![Confused](https://mbworld.org/forums/images/smilies/confused.gif)
#72
MBWorld Fanatic!
Naw, just save from one post to another. Don't keep copies on my computer. Maybe he can make us a Remus like exhaust for cheap. I would love the Remus, just can't bring myself to spend $600 although it's probably worth it.
#73
MBWorld Fanatic!
Join Date: Nov 2001
Location: Sitting behind thing freakin desk of mine. Dreaming I was playing my Taylors, and driving my Benz. Long Live The VRAA!!!!!!
Posts: 2,924
Likes: 0
Received 1 Like
on
1 Post
C230 Sports Coupe
I just cant understand why Mercedes performance parts are so dang high. Camaro's Mustangs Audi's VW's Bimmers, they are plentiful and cheaper when it comes to aftermarket parts.. I mean my service guy at the Chevy dealership helped me make my own exhaust, and helped me install a Z06 intake manifold. Audi practically builds the cars to be tuned. This really has me not wanting another Benz. I didnt know it when I bought the car that it was this hard to mod. I figured it had a SC, that had been around in SLK for a few years. So slap a smaller sc pulley on it and presto more HP. NOPE. Mercedes just arent built to mod. Still a great car none the less. But $$$ to make it faster.
#74
Former Vendor of MBWorld
Originally posted by Buellwinkle
Maybe he can make us a Remus like exhaust for cheap
Maybe he can make us a Remus like exhaust for cheap
#75
MBWorld Fanatic!
Originally posted by TimmyC230boy
I just cant understand why Mercedes performance parts are so dang high.
I just cant understand why Mercedes performance parts are so dang high.
It's because of people like you that buy from these high priced tuners. Just say NO Timmy, you can do it, don't keep supporting these tuners just for quick fix, just say NO and help us build a better America, one where every MB owner is free to buy all the performance parts he wants for the same price as Camaro and Mustang owners. An America where you are not judged by the star on your gril. The America we love. God bless America.
BlackC230Coupe, sorry but it's the only way we can get this country back on track. By allowing free flow of information and making a better product for cheaper in Mexico. Besides, while we are all trying to get a less expensive muffler your are riding in style.