DIY installation of AVIC & other aftermarket HU's for W203 (Warning! lots of images!)
Last edited by supermotard; Feb 25, 2008 at 09:29 PM.

The Best of Mercedes & AMG

C-class (W203) Jun-04 > CAN With Steering wheel control and Fakra connector CA-R-PI.133
for your car I think you will need the 133
http://cgi.ebay.com/ebaymotors/PIONE...spagenameZWDVW

I have all connected except that plug! Off course my steering wheel buttons aren't working, but I have Pioneer at my cluster!
I don't have the connector n.2, my radio didn't bring it, but I have the connector n.3 with all connections plugged to an 4 channel amp!
The unit is working 100% even without the connector n.2!
What is missing?!
I have all connected except that plug! Off course my steering wheel buttons aren't working, but I have Pioneer at my cluster!
I don't have the connector n.2, my radio didn't bring it, but I have the connector n.3 with all connections plugged to an 4 channel amp!
The unit is working 100% even without the connector n.2!
What is missing?!
1. Cam someone draw me what wires to tap into from the radio and metra harness? To install the SWI-X+SWI-CAN?
2nd link is PDF of install...
http://www.pac-audio.com/products/pr...el%20Interface
http://pac-audio.com/instructions/swi-can.pdf
3rd connection diagram which I just noticed...
http://pac-audio.com/instructions/sw...pp%20guide.pdf
One question, it appears that after installing my sunroof controls are a little wacky to open the sunroof normally I could just pull back on the button once and it would open all the way. now it only goes back about 4" and stops then I pull back again for another 4". Also the windows used to go all the way up with on pull on the window switch and now I have to pull and hold to get the window up.
Does this have anything to do with the Avic Install / CAN system?
Car is a 2007 C230 Sport.
I'm using a BEST harness that the my car-fi supplier indicated fit the car's harness (which it does perfectly)
I appreciate any and all help.
I have all connected except that plug! Off course my steering wheel buttons aren't working, but I have Pioneer at my cluster!
I don't have the connector n.2, my radio didn't bring it, but I have the connector n.3 with all connections plugged to an 4 channel amp!
The unit is working 100% even without the connector n.2!
What is missing?!
I bumped into the same problem.
That little "Jack" connector is to go to the connector 2 behind your unit. There is no plug in the connector 2 for that !! true! actually you have to conect the harness provided in the box to the connector 2 then you will see this plug on the harness.
One question, it appears that after installing my sunroof controls are a little wacky to open the sunroof normally I could just pull back on the button once and it would open all the way. now it only goes back about 4" and stops then I pull back again for another 4". Also the windows used to go all the way up with on pull on the window switch and now I have to pull and hold to get the window up.
Does this have anything to do with the Avic Install / CAN system?
Car is a 2007 C230 Sport.
I'm using a BEST harness that the my car-fi supplier indicated fit the car's harness (which it does perfectly)
I appreciate any and all help.

That little "Jack" connector is to go to the connector 2 behind your unit. There is no plug in the connector 2 for that !! true! actually you have to conect the harness provided in the box to the connector 2 then you will see this plug on the harness.
The adapter instructions where useless!!









