bemz

I got 1/6 evo carlsson rims, and i tried to put those on 2004 c240, but they rub the suspension. And the workship guy told me if i use spacer on my car, it will rub the fender.
Anyone can help give me a suggestion?
Thanks a lot.

white_w203

so you sure it's meant for you car? offset is critical. mabye for an e-class or s-class maybe....

bemz

Thanks for replying me.
ET for front is 40 and 45 for rear. and the rims are 19/8.5 front, 19/10 rear.
i saw him put a front wheel and it was rubbing a little bit without the bolds on.
And I'm planning to lowered my car after this, so I think it will be more rub after that, right? (if somehow the rims can be fitted.)

govertime

The offset is way off.
I believe stock is front - 32 and rear - 35.

kaze81

Looks like you get the wheels off for E/S-class according to that offset. Good luck...

FrankW

you always have to run Carlsson's own spacer on their rims.

all their rims come out to be either ET40 or ET45.

you'll need a 12mm spacer for the front and 10mm for the rear. they'll come with bolts if ordered from Carlsson about $50-60 per wheel.

bemz

Hey Frank, so then if i got the spacer from carlsson itself, are the rims gonna fit well? because I really want to get 19x10 for the rear.
Do i need any other extension to get them fit?

FrankW

yes if you get the spacer kit it'll fit well.

I had the 1/16 BE 19x8.5 and 19x10. there's no problem.

bemz

k k thanks frank.
i'll try to fit those on, and i'll let u know soon ^^