Custom Intercooler Done!!!!
#26
MBWorld Fanatic!
#27
Member
Thread Starter
Join Date: May 2006
Location: Bangkok
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
C200K W203
I dont have the OBDII Scan so I cant tell you all the tech and stuff, but all i care is i am very satisfy with the look of this IC and the power gain was phenominal. Dyno is coming soon.
Mr. Buell... About the weld, its deliberate bro. Its a stlye here in Thailand to have weld that way. And the part you see that look sloppy is the bottom part of the IC. The Top part is full polish. For 400USD you cant beat the price man.
here is comparison with stock IC. This one was made for my friend CLK200Kom
Mr. Buell... About the weld, its deliberate bro. Its a stlye here in Thailand to have weld that way. And the part you see that look sloppy is the bottom part of the IC. The Top part is full polish. For 400USD you cant beat the price man.
here is comparison with stock IC. This one was made for my friend CLK200Kom
#28
Member
Thread Starter
Join Date: May 2006
Location: Bangkok
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
C200K W203
the piping is still stock. its about 2.5" I am considering getting custom piping done with resonator deletion, it only cost 200usd to make stainless steel cat back piping, may be another 100usd for high grade exhaust wrap. However, what pulling me back is the noise level on my car is already loud.
#30
Super Moderator Alumni
Join Date: Mar 2004
Location: West Los Angeles
Posts: 7,684
Likes: 0
Received 10 Likes
on
5 Posts
Midnight Blue 2004.5 C230 Kompressor Sport Sedan. 2002 w210 E320, 2009 w211 E350 Sport
the piping is still stock. its about 2.5" I am considering getting custom piping done with resonator deletion, it only cost 200usd to make stainless steel cat back piping, may be another 100usd for high grade exhaust wrap. However, what pulling me back is the noise level on my car is already loud.
Either way, even though the car is forced induction, I'm not sure if making bigger piping on the exhaust will generate power. In fact, if the piping is increased too big, it could cause power loss.
#31
MBWorld Fanatic!
Join Date: May 2005
Location: East Bay, CA
Posts: 2,006
Likes: 0
Received 0 Likes
on
0 Posts
is SOLD
Your car is a 2.0, right? At least that's what I understand with the C200K, even though it is the m271 engine.
Either way, even though the car is forced induction, I'm not sure if making bigger piping on the exhaust will generate power. In fact, if the piping is increased too big, it could cause power loss.
Either way, even though the car is forced induction, I'm not sure if making bigger piping on the exhaust will generate power. In fact, if the piping is increased too big, it could cause power loss.
#32
Super Moderator Alumni
Join Date: Mar 2004
Location: West Los Angeles
Posts: 7,684
Likes: 0
Received 10 Likes
on
5 Posts
Midnight Blue 2004.5 C230 Kompressor Sport Sedan. 2002 w210 E320, 2009 w211 E350 Sport
Never mind. I was wrong. For some reason I was thinking they didn't change it from the m111 format. They had the 180k, 200K, 230K for that engine and it was classified specifically to the liter identification.
#34
Member
Thread Starter
Join Date: May 2006
Location: Bangkok
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
C200K W203
Your car is a 2.0, right? At least that's what I understand with the C200K, even though it is the m271 engine.
Either way, even though the car is forced induction, I'm not sure if making bigger piping on the exhaust will generate power. In fact, if the piping is increased too big, it could cause power loss.
Either way, even though the car is forced induction, I'm not sure if making bigger piping on the exhaust will generate power. In fact, if the piping is increased too big, it could cause power loss.
Yes sir, 3" piping will be too big. Since I just got my hand on a really handsome 200cel race cat I think I will go for a 2.5" piping and resonator deletion as well. This should be interesting upgrade. Will keep you guy posted.
you are right M271 is 1.8 L
However, Mine is M111K it got 2.0 L with red cover
Last edited by raklert; 01-10-2007 at 02:40 AM.
#35
Super Moderator Alumni
Join Date: Mar 2004
Location: West Los Angeles
Posts: 7,684
Likes: 0
Received 10 Likes
on
5 Posts
Midnight Blue 2004.5 C230 Kompressor Sport Sedan. 2002 w210 E320, 2009 w211 E350 Sport
Yes sir, 3" piping will be too big. Since I just got my hand on a really handsome 200cel race cat I think I will go for a 2.5" piping and resonator deletion as well. This should be interesting upgrade. Will keep you guy posted.
you are right M271 is 1.8 L
However, Mine is M111K it got 2.0 L with red cover
you are right M271 is 1.8 L
However, Mine is M111K it got 2.0 L with red cover
Anyways, good luck with the project and definitely update us when you get the dynos done.