LiquidVac Clean Oil Change
#1
LiquidVac Clean Oil Change
www.liquidvac.com
I just ordered one of these, does anyone else use this technique? It's 65 bucks delivered, which is about $240 less than what the dealer wants to prob do the same thing...
Does the dealer use the suction method or the oil plug method?
I just ordered one of these, does anyone else use this technique? It's 65 bucks delivered, which is about $240 less than what the dealer wants to prob do the same thing...
Does the dealer use the suction method or the oil plug method?
#4
Super Member
Joined: Oct 2004
Posts: 761
Likes: 0
From: Oregon
2005 C55, 1988 260E, 2000 Chevrolet Silverado
#5
I have a model with a 6 gallong tank from Harbor Freight. Works the same except that I don't have to hand pump it, just hook it to my Sears Air Compressor and it's done in 5 minutes.
Trending Topics
#9
Super Member
Joined: Oct 2004
Posts: 761
Likes: 0
From: Oregon
2005 C55, 1988 260E, 2000 Chevrolet Silverado
Do you really thing you get all of the dirty oil out by draining it from the bottom? There are area's in the engine where the oil settles when the engine is off that you will not be able to get it out without pulling off the valve cover, front cover, and etc. So if you think by getting those last drops out your saving your engine. Myself I will sit back pump a couple of times drink my beer and then change my filter and fill it back up. If you want to put the car on ramps, pull off the belly pan, have that first bit of oil run down your arm, go right ahead. I like my beer to much
#10
Member
Joined: Nov 2003
Posts: 227
Likes: 0
From: Houston, Texas
1981 300SD TurboDiesel, 1982 300D TurboDiesel
Mercedes-Benz has found the dipstick extraction method removes more oil than the conventional drain plug method. You ought not worry about getting all the oil out however, no matter what method you use there's going to be a quart or two of oil left in all the little passages, nooks and crannies of the engine, that's the way they were designed. The most important thing is for you to get most of the old oil out and replace it with fresh oil. In fact, since the mid 70's, their engines have been designed to drain oil out of the dipstick tube. If you don't believe me, just extract the oil with a unit like a LiquiVac or MityVac, and then undo the drain plug. No oil will come out. If you're using Mobil 1 or another good MB approved oil, you shouldn't have to worry about junk left in the bottom of your pan, all dirt should be in the oil or in the filter. If you do have junk left in the bottom of your pan, that means your engine has been abused.
#11
Do you really thing you get all of the dirty oil out by draining it from the bottom? There are area's in the engine where the oil settles when the engine is off that you will not be able to get it out without pulling off the valve cover, front cover, and etc. So if you think by getting those last drops out your saving your engine. Myself I will sit back pump a couple of times drink my beer and then change my filter and fill it back up. If you want to put the car on ramps, pull off the belly pan, have that first bit of oil run down your arm, go right ahead. I like my beer to much
Also, you don't drop the pan, just unscrew the plug. I rarely ever get oil on me.
Of course, I have a lift now. But yeah, I use to use Rhino ramps.
#12
Super Member
Joined: Oct 2004
Posts: 761
Likes: 0
From: Oregon
2005 C55, 1988 260E, 2000 Chevrolet Silverado
Do you really think you get all of the dirty oil out by sucking? Maybe I need to drop the oil pan bottom and let all of us see what the heck is inside of that baby. You have my curiosity peaked now.
Also, you don't drop the pan, just unscrew the plug. I rarely ever get oil on me.
Of course, I have a lift now. But yeah, I use to use Rhino ramps.
Also, you don't drop the pan, just unscrew the plug. I rarely ever get oil on me.
Of course, I have a lift now. But yeah, I use to use Rhino ramps.
#14
I would say that pumping out the liquid through the oil dip stick area is better because it allows you to change your oil more often. At least with myself, I know that I will change the oil alot more often if i just didn't have to crawl under the car, etc etc...
#15
Super Member
Joined: Oct 2004
Posts: 761
Likes: 0
From: Oregon
2005 C55, 1988 260E, 2000 Chevrolet Silverado
#16
I went to the West Marine and picked up a 6 qt. ( I believe it is 6 qt.) sucker and it works great but you still have to watch those hot temps, better than the MVP Topsider which IMHO sucks.
I just couldn't pull in and suck it out, I had to let it cool for a while but not get cold. I guess that was my other problem besides not getting all the oil out. I felt like I had a window to get the oil changed in.
When I drain, I get 8.5 qts. back out. When I suck, I can only get 8.25 at best. But then, I may not have the gift and mine is a hand pump.
#17
My .02 on vacuum vs. drain......
I drain it from the plug because I like to look at everything underneath the car. I also periodically remove the bottom engine cover just to look. I think there is more residual oil left by the vacuum method than the drain plug method but it's too minor to make a difference. As a side note....if you don't first remove the oil filter, or let air in from the top by loosening the filter nut, the oil trapped in the filter housing doesn't drain.
#19
Here's one reason for you to never drain it from the drain plug. Over time the threads in the aluminum around the drainplug wear and start leaking like on our SLK. Dealer wants about $900 to replace the oil pan. If you do it from above, a) you don't get dirty, b) you do just as good a job, c) looking at the top of the engine is just as much fun as the bottom.
#21
Sounds like it was overtightened once or twice. We're not talking about a high use part here so it didn't happen from repetition. An SA told me the reason they even keep the drain plug is because some world locations don't have access to a vacuum system.
#24
Also, that was a good point about pulling your filter first. I did that last time and a whole quart stayed behind. Wow! Pulled the filter and bamo, oil rushed out of the plug. Very eye opening.