Trunk Lid Paint Chipping/Rusting BAD
#1
MBWorld Fanatic!
Thread Starter
Trunk Lid Paint Chipping/Rusting BAD
On the bottom ledge of my trunk lid, the paint is peeling away in small pieces, it's gotten worse over time and it's reached the point where even touch-up paint doesn't help. As you can see in the picture, the piece on the right is about to peel off and I'm going to be left with a large rusted portion of a trunk. I'm not familiar with body shops or whatever, but is there anything that they could do for my trunk to make it look normal?
#3
Super Member
Join Date: Mar 2004
Location: michigan/ohio/indiana
Posts: 917
Likes: 0
Received 0 Likes
on
0 Posts
2013 c300 4matic, 2002 c240
On the bottom ledge of my trunk lid, the paint is peeling away in small pieces, it's gotten worse over time and it's reached the point where even touch-up paint doesn't help. As you can see in the picture, the piece on the right is about to peel off and I'm going to be left with a large rusted portion of a trunk. I'm not familiar with body shops or whatever, but is there anything that they could do for my trunk to make it look normal?
You can see it also in your signature, right under the license plate, correct? I rarely find any bodyshops that deal with rust. gl
#4
MBWorld Fanatic!
Thread Starter
i talked to my tech about it and after looking at it, he told me that its because water is getting behind the piece that holds the plate and is building up behind the paint job, pushing the paint out.
#5
Super Member
Join Date: Jan 2007
Location: Boston
Posts: 974
Likes: 0
Received 0 Likes
on
0 Posts
2003 C240
In my car, whenever it rains and I open the trunk, water drips from one of the pastic clamp holes or something, and drips right into the trunk or on my head if I forget about it
#6
Super Member
Join Date: Jan 2007
Location: Boston
Posts: 974
Likes: 0
Received 0 Likes
on
0 Posts
2003 C240
Kevblah Delete PMs!!!
Hey delete your PMs!
EDIT
Kev have to go to next class...I'll try and meet up w/ you at the dealership...Suzuki one right?? round 130-150 I'll find you...lol
EDIT
Kev have to go to next class...I'll try and meet up w/ you at the dealership...Suzuki one right?? round 130-150 I'll find you...lol
Last edited by LuxuryC240; 04-27-2007 at 11:48 AM.
Trending Topics
#8
MBWorld Fanatic!
Join Date: Sep 2005
Location: NJ
Posts: 5,769
Likes: 0
Received 0 Likes
on
0 Posts
'08 E550 4Matic
#10
MBWorld Fanatic!
Join Date: Sep 2005
Location: NJ
Posts: 5,769
Likes: 0
Received 0 Likes
on
0 Posts
'08 E550 4Matic
#11
MBWorld Fanatic!
Join Date: Aug 2006
Location: SoCal, Irvine
Posts: 3,020
Likes: 0
Received 0 Likes
on
0 Posts
Stage 2 C7 A6, QX60
#12
Member
hey kev, dunno if this helps but my trunk is also beggining to bubble around the groove where the rubber seal for the trunk touches the metal. I figure its due to the trunk seal not pressing tight enough up against the metal and then the water gets trapped between rubber and metal and thats what causes the rust forming. My solution has been to keep a rag in the trunk and when it rains just wipe the area dry. Anyways thats my case, maybe it applies to you as well - good luck