Just installed my OEM 2005+ Headlamps
05-07-2007, 05:45 PM
#76
Member
Thread Starter
Join Date: Nov 2006
Location: Boston, MA
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
03 C230K
Yeah, sorry, I meant those two screws. Oh, so if my headlight is aimed too high, I can twist the screw with a screwdriver until I'm satisfied with the aiming of the light?
Just for reference, what's a good guideline for how high and how left/right to aim your headlights?
Just for reference, what's a good guideline for how high and how left/right to aim your headlights?
05-07-2007, 05:48 PM
#77
MBWorld Fanatic!
Best instructions I have seen to PROPERLY aim your headlights is here If you follow those instructions you will get the most out of you new headlights.
By the way, the clears are a nice change from the frosty's
By the way, the clears are a nice change from the frosty's
im just gonna play it by ear if you know what i mean
05-07-2007, 06:35 PM
#80
MBWorld Fanatic!
05-07-2007, 08:28 PM
#81
MBWorld Fanatic!
Finally got dark out, here's a pic I took about 10 minutes ago.
The clear lens headlamp is on the driver's side and the frosted is on the passenger's side. Is the driver's headlight aimed too low or is the driver's side headlight supposed to be aimed lower than the other side? Is the passenger side aimed too high? I'd be VERY happy if I put in the clear headlamp for the passenger side and the light beams matched up exactly. You can see it in the picture; there is a very very very annoying hot spot, lol.
The clear lens headlamp is on the driver's side and the frosted is on the passenger's side. Is the driver's headlight aimed too low or is the driver's side headlight supposed to be aimed lower than the other side? Is the passenger side aimed too high? I'd be VERY happy if I put in the clear headlamp for the passenger side and the light beams matched up exactly. You can see it in the picture; there is a very very very annoying hot spot, lol.
05-07-2007, 08:40 PM
#84
MBWorld Fanatic!
cag, i'd lower the pass. side, but im gonna put in the clear ones soon anyways, most likely wednesday. and if i dont this week, i'll definitely lower the beam on the frosted one, just cuz it'd be annoying to drive with such a difference in light output
05-07-2007, 08:54 PM
#86
Member
Thread Starter
Join Date: Nov 2006
Location: Boston, MA
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
03 C230K
05-07-2007, 09:09 PM
#87
MBWorld Fanatic!
