***Official PhotoShop (wheels/drop) my ride thread***
#101
Super Member
Join Date: Jan 2007
Location: Boston
Posts: 974
Likes: 0
Received 0 Likes
on
0 Posts
2003 C240
#102
MBWorld Fanatic!
Join Date: Jan 2006
Location: Pasadena, CA
Posts: 3,206
Likes: 0
Received 6 Likes
on
5 Posts
2002 C230K, 2013 BMW 328, 2015 BMW X5
Damn, thanks for the work. I think I likey. Now I have to work out back spacing issues and "woobly" bolts. The stock bolt spacing is 4X98 and these are 4X100.
But I think it is worth it.
KompressorC230 and onecoolloser, thanks much. Now I have something to pine my attention to.
The car needs so much work right now. I'm into it for close to 2k right now, and she needs a clutch and some syncros. The synchros are beyond my abilitities. But driving it around is sooooo choice.
SeaCoupe sits unwashed now for over 2 weeks. Heck, I'm saving so much in gas right now, I'm kinda paying for the Fiat.
E
But I think it is worth it.
KompressorC230 and onecoolloser, thanks much. Now I have something to pine my attention to.
The car needs so much work right now. I'm into it for close to 2k right now, and she needs a clutch and some syncros. The synchros are beyond my abilitities. But driving it around is sooooo choice.
SeaCoupe sits unwashed now for over 2 weeks. Heck, I'm saving so much in gas right now, I'm kinda paying for the Fiat.
E
#104
Super Member
Join Date: Jan 2007
Location: Boston
Posts: 974
Likes: 0
Received 0 Likes
on
0 Posts
2003 C240
HAHA thanks shake. Although I like chrome wheels, I don't like the slammed look. If I could get the look of sanfs work on my car, that would be sweet, except these wheels are big, and the front rub when I turn the wheel all the way either way...that's why I'm reluctant to lower, yet I'll probably figure something out in the spring about lowering it when I end up putting the wheels back on after the winter
#107
MBWorld Fanatic!
Join Date: Mar 2007
Location: Mid-west
Posts: 5,882
Likes: 0
Received 0 Likes
on
0 Posts
IS300
HAHA thanks shake. Although I like chrome wheels, I don't like the slammed look. If I could get the look of sanfs work on my car, that would be sweet, except these wheels are big, and the front rub when I turn the wheel all the way either way...that's why I'm reluctant to lower, yet I'll probably figure something out in the spring about lowering it when I end up putting the wheels back on after the winter
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
LOL, ridin' rimz chyea. 26" rims FTW
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
#108
MBWorld Fanatic!
Join Date: Aug 2007
Location: Cleveland, Ohio
Posts: 1,311
Likes: 0
Received 0 Likes
on
0 Posts
2003 Cl 500
can i try a shot at it? not a C but should work ok no lol? threw in a bunch of angles for u to pick from.
![](http://img.photobucket.com/albums/v629/Goliath27/MRCL%20WHP/before1.jpg)
[IMG]
[/IMG]
[IMG]
[/IMG]
+these wheels in color matched bars(lip stays teh same).... (sorry, only good sized pic i could find)
![](http://members.***.net/snafe4/CLSSTYLEONE.JPG)
but can someone add 1 thing for me, i want to see these wheels with some kind of differennt colored callipers, maybe yellow or red? thank you very much
ALi
![](http://img.photobucket.com/albums/v629/Goliath27/MRCL%20WHP/before1.jpg)
[IMG]
![](http://img.photobucket.com/albums/v629/Goliath27/MRCL%20WHP/before.jpg)
[IMG]
![](http://img.photobucket.com/albums/v629/Goliath27/MRCL%20WHP/before3.jpg)
+these wheels in color matched bars(lip stays teh same).... (sorry, only good sized pic i could find)
but can someone add 1 thing for me, i want to see these wheels with some kind of differennt colored callipers, maybe yellow or red? thank you very much
ALi
#109
Super Moderator Alumni
Join Date: Mar 2004
Location: West Los Angeles
Posts: 7,684
Likes: 0
Received 10 Likes
on
5 Posts
Midnight Blue 2004.5 C230 Kompressor Sport Sedan. 2002 w210 E320, 2009 w211 E350 Sport
the same pull down trick as PS. then just edit here and edit there just enough to fool my eyes... that's pretty much it.
1. use "free-form select"
2. pull down the selected area (car body including rear wheel)
3. select "pick color" or copy area then use pencil, brush..etc. to fix up mismatch areas
1. use "free-form select"
2. pull down the selected area (car body including rear wheel)
3. select "pick color" or copy area then use pencil, brush..etc. to fix up mismatch areas
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
#110
MBWorld Fanatic!
Join Date: Mar 2007
Location: Mid-west
Posts: 5,882
Likes: 0
Received 0 Likes
on
0 Posts
IS300
#111
MBWorld Fanatic!
Join Date: Aug 2007
Location: Cleveland, Ohio
Posts: 1,311
Likes: 0
Received 0 Likes
on
0 Posts
2003 Cl 500
#114
Member
Join Date: Mar 2007
Location: Toronto, ON.
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
2003 C240 Classic
Couple things to note though.
When you open a new page to "fill" with your "pattern", make sure that the page is atleat 1600x1200 pixels big. Then Twirl it with the angle set to 50. It makes it a lot more reaalistic when you shrink it over the hood.
Last edited by onecoolloser; 09-12-2007 at 11:21 PM.
#119
MBWorld Fanatic!
Join Date: Aug 2007
Location: Cleveland, Ohio
Posts: 1,311
Likes: 0
Received 0 Likes
on
0 Posts
2003 Cl 500
lol sweeeeeeet, i tried to get photshop installed on my pc and it was a no go, i have a Pro version installed and it has to be updated before i can install the PS
the pictures i included, how are they, ok?
ALi
the pictures i included, how are they, ok?
ALi
#120
MBWorld Fanatic!
Thread Starter
Join Date: Nov 2003
Location: Fresno, CA
Posts: 4,278
Likes: 0
Received 0 Likes
on
0 Posts
'09 A4 S Line
can i try a shot at it? not a C but should work ok no lol? threw in a bunch of angles for u to pick from.
+these wheels in color matched bars(lip stays teh same).... (sorry, only good sized pic i could find)
but can someone add 1 thing for me, i want to see these wheels with some kind of differennt colored callipers, maybe yellow or red? thank you very much
ALi
+these wheels in color matched bars(lip stays teh same).... (sorry, only good sized pic i could find)
but can someone add 1 thing for me, i want to see these wheels with some kind of differennt colored callipers, maybe yellow or red? thank you very much
ALi
#121
MBWorld Fanatic!
Join Date: Jan 2006
Location: Pasadena, CA
Posts: 3,206
Likes: 0
Received 6 Likes
on
5 Posts
2002 C230K, 2013 BMW 328, 2015 BMW X5
As a middle aged man, I don't find myself saying this very often, but that is just SICK! That hood would look amazing.
I have actually wanted to try to learn how to work with CF. I have a couple of pieces on my Fiat, I want to fab up. Anyone know of a website for learning, or books?
E
#122
Super Member
Join Date: Feb 2007
Location: the LA-town, CA
Posts: 705
Likes: 0
Received 1 Like
on
1 Post
a w203 cÖuper
As a middle aged man, I don't find myself saying this very often, but that is just SICK! That hood would look amazing.
I have actually wanted to try to learn how to work with CF. I have a couple of pieces on my Fiat, I want to fab up. Anyone know of a website for learning, or books?
E
I have actually wanted to try to learn how to work with CF. I have a couple of pieces on my Fiat, I want to fab up. Anyone know of a website for learning, or books?
E
![naughty](https://mbworld.org/forums/images/smilies/naughty.gif)
***If you need help just ask me and onecoolloser.
#123
MBWorld Fanatic!
Thread Starter
Join Date: Nov 2003
Location: Fresno, CA
Posts: 4,278
Likes: 0
Received 0 Likes
on
0 Posts
'09 A4 S Line
Thanks. I knew it would thats why i tried it
...but doing CF was hard for me. Go to the 2nd page and theres a link for it. I tried doing it that way but my PShop was different. So i had to search my way through it.
***If you need help just ask me and onecoolloser.
![naughty](https://mbworld.org/forums/images/smilies/naughty.gif)
***If you need help just ask me and onecoolloser.
#125
Super Member
Join Date: Nov 2006
Location: Houston
Posts: 912
Likes: 0
Received 0 Likes
on
0 Posts
02 cl203
As a middle aged man, I don't find myself saying this very often, but that is just SICK! That hood would look amazing.
I have actually wanted to try to learn how to work with CF. I have a couple of pieces on my Fiat, I want to fab up. Anyone know of a website for learning, or books?
E
I have actually wanted to try to learn how to work with CF. I have a couple of pieces on my Fiat, I want to fab up. Anyone know of a website for learning, or books?
E