infected's Coupe
08-20-2009, 04:53 PM
#176
MBWorld Fanatic!
Join Date: Sep 2005
Location: South Coast Metro/Cerritos/Yorba Linda California
Posts: 1,244
Likes: 0
Received 0 Likes
on
0 Posts
'05 C230K '10 GLK350 '13 SMART
08-21-2009, 08:03 PM
#180
MBWorld Fanatic!
Nice...I've never seen one brand new with no soot on it already...
got mine used.
So, can I join your club? he he...
The header (supersprint in my case) Remus club...
You may be surprised to know, my Remus recently came unwelded right at the point where the pipe goes into the muffler.
It had to drive it for about 40 miles at about 120 DB till I got to a place where they had
phone reception....and margies. ie Nepenthe.
We're talking hwy 1 Big Sur territory.
I had the car towed the rest of the way home (Thanks AAA)
and the re-weld cost a big 50 bucks.
Yeh, I love the Remus over stock...sound is way better.
got mine used.
So, can I join your club? he he...
The header (supersprint in my case) Remus club...
You may be surprised to know, my Remus recently came unwelded right at the point where the pipe goes into the muffler.
It had to drive it for about 40 miles at about 120 DB till I got to a place where they had
phone reception....and margies. ie Nepenthe.
We're talking hwy 1 Big Sur territory.
I had the car towed the rest of the way home (Thanks AAA)
and the re-weld cost a big 50 bucks.
Yeh, I love the Remus over stock...sound is way better.
Enough with the bickering! Time to MODIFY!!!
Finally a drone-free system.
I'm extremely impressed with the quality from Remus. I was afraid the car would sound raspy after installing the Remus with the Kleemann header but I was wrong. There is absolutely no rasp and I would say it roars only slightly more than the stock muffler.
Finally a drone-free system.
I'm extremely impressed with the quality from Remus. I was afraid the car would sound raspy after installing the Remus with the Kleemann header but I was wrong. There is absolutely no rasp and I would say it roars only slightly more than the stock muffler.
08-28-2009, 12:26 PM
#185
MBWorld Fanatic!
Thread Starter
Join Date: Nov 2005
Location: Calgary, Alberta
Posts: 1,497
Likes: 0
Received 2 Likes
on
2 Posts
2007 ML500
Finally found plug and play license plate lights!!
I was never a fan of the resistor mod for some reason so I stayed with Hoen bulbs. Just recently Hoen came out with plug and play led bulbs that do not throw codes and do not flicker.
I can vouch for them that the new hoen led bulbs are far brighter and whiter than the original halogen bulbs while not throwing any codes or flickering.
This is a MUST DO mod!!
Pictures are in broad daylight. Will update with more night shots later.
I was never a fan of the resistor mod for some reason so I stayed with Hoen bulbs. Just recently Hoen came out with plug and play led bulbs that do not throw codes and do not flicker.
I can vouch for them that the new hoen led bulbs are far brighter and whiter than the original halogen bulbs while not throwing any codes or flickering.
This is a MUST DO mod!!
Pictures are in broad daylight. Will update with more night shots later.
Last edited by infected; 08-28-2009 at 12:30 PM.
08-28-2009, 12:57 PM
#188
Member
Join Date: Jun 2009
Location: vancouver, bc
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
2005 c320 4matic
man....i wished you could of told me earlier! i ordered the other hoen bulbs...the incandescent ones
how does the LED hoens compared to the hoens you replace?
is it that much bluer/brighter?
how does the LED hoens compared to the hoens you replace?
is it that much bluer/brighter?
Finally found plug and play license plate lights!!
I was never a fan of the resistor mod for some reason so I stayed with Hoen bulbs. Just recently Hoen came out with plug and play led bulbs that do not throw codes and do not flicker.
I can vouch for them that the new hoen led bulbs are far brighter and whiter than the original halogen bulbs while not throwing any codes or flickering.
This is a MUST DO mod!!
Pictures are in broad daylight. Will update with more night shots later.
I was never a fan of the resistor mod for some reason so I stayed with Hoen bulbs. Just recently Hoen came out with plug and play led bulbs that do not throw codes and do not flicker.
I can vouch for them that the new hoen led bulbs are far brighter and whiter than the original halogen bulbs while not throwing any codes or flickering.
This is a MUST DO mod!!
Pictures are in broad daylight. Will update with more night shots later.
09-27-2009, 05:09 PM
#192
MBWorld Fanatic!
Thread Starter
Join Date: Nov 2005
Location: Calgary, Alberta
Posts: 1,497
Likes: 0
Received 2 Likes
on
2 Posts
2007 ML500
Just an update.
I have had the Hoen dLED plate lights for only 1 month and they **** the bed last night.
I'm trying to contact Hoen now to see if they'll cover for the bulbs.
Yes, they're flickering and warning messages are coming up left right and center.
I have had the Hoen dLED plate lights for only 1 month and they **** the bed last night.
I'm trying to contact Hoen now to see if they'll cover for the bulbs.
Yes, they're flickering and warning messages are coming up left right and center.
09-27-2009, 05:14 PM
#193
MBworld Guru
Join Date: Apr 2002
Location: Diamond Bar, CA
Posts: 22,007
Likes: 0
Received 6 Likes
on
6 Posts
white and whiter
but do they still light up? even with flicker?
and Hoen should send you a new set. I had their c5w bulbs before and one burnt out in about a month, so I contacted them and they sent out a new bulb along with some prototype LED bulbs which recently one of the LED bulbs burnt out. looking for replacement right now.
if they send you new sets I'd be interested in the ones that are flickering on your car right now. I have resisters so as long as they light up I can use them.
and Hoen should send you a new set. I had their c5w bulbs before and one burnt out in about a month, so I contacted them and they sent out a new bulb along with some prototype LED bulbs which recently one of the LED bulbs burnt out. looking for replacement right now.
if they send you new sets I'd be interested in the ones that are flickering on your car right now. I have resisters so as long as they light up I can use them.
Last edited by FrankW; 09-27-2009 at 05:18 PM.
09-27-2009, 08:40 PM
#194
Super Member
Join Date: Jan 2005
Location: Chula Vista, San Diego
Posts: 952
Likes: 0
Received 0 Likes
on
0 Posts
c230 Kompressor Coupe
DAMMIT! I just bought these. If you mentioned this earlier, I wouldn't have gotten them.
09-27-2009, 09:52 PM
#195
MBWorld Fanatic!
Join Date: Feb 2005
Location: Jakarta
Posts: 1,155
Likes: 0
Received 0 Likes
on
0 Posts
1996 MB E320 & 2010 Nissan Elgrand
Maverik (member in this forum) found this EBAY LED bulbs for license plate and he's had the bulbs for almost 2 months now I think. The price is 29.99
09-27-2009, 09:53 PM
#196
MBWorld Fanatic!
Join Date: Feb 2005
Location: Jakarta
Posts: 1,155
Likes: 0
Received 0 Likes
on
0 Posts
1996 MB E320 & 2010 Nissan Elgrand
but do they still light up? even with flicker?
and Hoen should send you a new set. I had their c5w bulbs before and one burnt out in about a month, so I contacted them and they sent out a new bulb along with some prototype LED bulbs which recently one of the LED bulbs burnt out. looking for replacement right now.
if they send you new sets I'd be interested in the ones that are flickering on your car right now. I have resisters so as long as they light up I can use them.
and Hoen should send you a new set. I had their c5w bulbs before and one burnt out in about a month, so I contacted them and they sent out a new bulb along with some prototype LED bulbs which recently one of the LED bulbs burnt out. looking for replacement right now.
if they send you new sets I'd be interested in the ones that are flickering on your car right now. I have resisters so as long as they light up I can use them.
Funny, I have their bulbs and one of them went out 8 months ago and I contacted them right away and no replacement bulbs until today
09-27-2009, 09:55 PM
#197
MBWorld Fanatic!
Join Date: Feb 2005
Location: Jakarta
Posts: 1,155
Likes: 0
Received 0 Likes
on
0 Posts
1996 MB E320 & 2010 Nissan Elgrand
09-27-2009, 10:23 PM
#198
Super Member
Join Date: Jan 2005
Location: Chula Vista, San Diego
Posts: 952
Likes: 0
Received 0 Likes
on
0 Posts
c230 Kompressor Coupe
09-28-2009, 12:18 AM
#199
MBWorld Fanatic!
Thread Starter
Join Date: Nov 2005
Location: Calgary, Alberta
Posts: 1,497
Likes: 0
Received 2 Likes
on
2 Posts
2007 ML500
I've gone through two sets of thier incandescent bulbs and they only lasted roughly over 8 months for me.
The LED still works but it flickers and I do not want to do the resistor mod. Will see if Hoen will get back to me or not.
I might give ebay a try, considering I paid over $60 CAD for the Hoens...
The LED still works but it flickers and I do not want to do the resistor mod. Will see if Hoen will get back to me or not.
I might give ebay a try, considering I paid over $60 CAD for the Hoens...
09-28-2009, 07:20 AM
#200
MBWorld Fanatic!
Join Date: Jul 2005
Location: New York City
Posts: 7,424
Likes: 0
Received 3 Likes
on
2 Posts
C55 ///AMG, 535xi
the Ebay ones are not bright at all, I have them, I got the Jlevi ones on my e60, and they are brighter than those.
the ebay ones are like....just a color change.
the ebay ones are like....just a color change.
