Squeaky rear....let's try this, second time around.
I'm not going to want to pay for anything else to get fixed if they should've fixed it right the first time!!
Thanks...input plz


good luck!
the lincoln towncar feel, I meant like suspension being so, soft, it feels like you're sitting in a boat! hahaha
Trending Topics
The Best of Mercedes & AMG




I'd say run run away!
What could possibly go WRONG with a set of coiled up thick wires that could have ANYTHING to do with a squeaky rear?

As Tru and others said, I would have the bushings sprayed heavily with silicon spray. My bet is that the sound goes away.
Pretty sure they can give you answers.
Thanks for everyone's input!! It sounds like it could've been a few other things as well.
p.s....squeaky brakes...does anyone know any quick and easy remedies for this
)))) It can be really annoying sometimes.




brakes. Thats the brand.
They last forever, don't squeal, grip like crazy, and don't make a mess.
Between now and then, um, likely you're best bet is just to live with it.
In order to make sure the shop uses that brand brakes, you may have to provide them yourself.
brakes. Thats the brand.
They last forever, don't squeal, grip like crazy, and don't make a mess.
Between now and then, um, likely you're best bet is just to live with it.
In order to make sure the shop uses that brand brakes, you may have to provide them yourself.
Do these akebonos work with stock rotors? If so I'll change them now even if I still have half of the thread.
I've been hearing this squeaking noise from my right rear suspension recently and it kind of comes and goes noise. Everyone suggested to spray some silicone lubricant on the sway bar bushings and endlink bushings and I think I'm going to try that. Should I be concerned about other things? I do have Tein Basic COs in my car.
The thing is I'm not familir with these bushings, can anyone please post some pictures of them? I did find some threads with decent pics and perhaps, someone can point me the bushings.
https://mbworld.org/forums/c-class-w...vers-tein.html
https://mbworld.org/forums/c-class-w...-thread-9.html
I hope John doesn't mind I borrow his threads and his pictures.
Last edited by B189s; Dec 15, 2009 at 03:53 AM.
http://www.canadiantire.ca/AST/brows...mbo%2BPack.jsp
Either one should be good? Just spray and drive? How much should I spray?
Last edited by B189s; Dec 15, 2009 at 03:36 AM.
https://mbworld.org/forums/c-class-w...e-diagram.html ( Post 9)
The sway bar bushings are #20. There are two that attach the sway bar to the body on bracket #30. While the end links are item #70, and they tend to wear out on their lower side that attaches to the the end of the sway bar.
Hope that makes some sense.






