Differential leak
#1
Differential leak
Has anyone noticed the rear differential leaking?
I have 160K kms (100K miles) on my car and noticed a slight leak from one side. Going to monitor it to see how much its leaking.
Not worth repairing, yet I'll keep the diff topped up with oil from now on.
How do you inspect the oil level in the diff?
I have 160K kms (100K miles) on my car and noticed a slight leak from one side. Going to monitor it to see how much its leaking.
Not worth repairing, yet I'll keep the diff topped up with oil from now on.
How do you inspect the oil level in the diff?
#2
never looked at it- but i would assume there is a threaded plug (hex or allen head) about half way up the diff. fill to the bottom of that threaded hole. if the threaded plug is on the top of the diff- fill to approximately half full. i would also assume that there is a similar threaded plug on the bottom of the diff to act as a drain plug. again- not positive that's how it is, but that's more or less standard practice on any other diff i have worked with.
#4
once the car is lifted up via a jack- the suspension should drop down enough to get to the plug with relative ease. i couldn't imagine them designing it in such a manner that the rear end needed to be dropped in order to perform a simple maint. task.
on a side note- for some reason i think i remember seeing a DIY on a rear diff lube. i will have to see if i can find the thread.
on a side note- for some reason i think i remember seeing a DIY on a rear diff lube. i will have to see if i can find the thread.
#5
C230 Sport Coupe FTW https://mbworld.org/forums/showthrea...d+differential
#6
Super Moderator
Joined: Jun 2008
Posts: 19,942
Likes: 183
From: Llandudno, Cape Town, South Africa
late 2009 CLK 350 Coupe Elegance, '65 Jaguar S Type wires
Make sure car is level when checking level & pop in a new seal unless it's only a very slight weep or it will let you down when you least expect it.
#7
Pop in a new seal?
How easy is it to change the diff seals?
I read it is a $500 job to do both. Since its only 1 seal I'm going to get a quote this week.
Trending Topics
#9
Super Moderator
Joined: Jun 2008
Posts: 19,942
Likes: 183
From: Llandudno, Cape Town, South Africa
late 2009 CLK 350 Coupe Elegance, '65 Jaguar S Type wires
Good - you got it done - I think you are wise - I know 5 hours is a sweat but you saved big bucks
#10
Trying to determine if I should pay the dealer the ~$600 to do this. Could it go from slow to all gone quickly? Wouldn't one hear the diff whining at highway speeds, etc?
Mine is leaking (2 of 3 seals I believe I was told). I was thinking of just topping it off and monitoring.... but Glyn says bad idea?
Mine is leaking (2 of 3 seals I believe I was told). I was thinking of just topping it off and monitoring.... but Glyn says bad idea?
#11
14MM hex Bolt
On the bottom right is the drain plug..
Left side on the top is the fill plug..
Remove the fill plug first then the drain plug
So easy
And so only 20 dollars for the whole job
On the bottom right is the drain plug..
Left side on the top is the fill plug..
Remove the fill plug first then the drain plug
So easy
And so only 20 dollars for the whole job
#12
i believe Phoenix is inquiring about replacing the seals, not replacing the fluid itself.
#14
Super Moderator
Joined: Jun 2008
Posts: 19,942
Likes: 183
From: Llandudno, Cape Town, South Africa
late 2009 CLK 350 Coupe Elegance, '65 Jaguar S Type wires
Trying to determine if I should pay the dealer the ~$600 to do this. Could it go from slow to all gone quickly? Wouldn't one hear the diff whining at highway speeds, etc?
Mine is leaking (2 of 3 seals I believe I was told). I was thinking of just topping it off and monitoring.... but Glyn says bad idea?
Mine is leaking (2 of 3 seals I believe I was told). I was thinking of just topping it off and monitoring.... but Glyn says bad idea?
Good luck!
#15
When I spoke to my SA about deferring it and just topping it off, he said that would be okay. I also asked if he ever heard about a diff just failing (seals going from slow to GONE, etc) and he said no. I trust Glyn's opinion more.
Is there 'nothing to it' in terms of replacing the diff seals? If I supply the MB parts, is it something to trust to an indy shop?
I am also thinking of parting ways with car (need money for legal matters), so I am not sure if it is best for me to do this or the possible new owner.
Is there 'nothing to it' in terms of replacing the diff seals? If I supply the MB parts, is it something to trust to an indy shop?
I am also thinking of parting ways with car (need money for legal matters), so I am not sure if it is best for me to do this or the possible new owner.
#17
Good to know. I still get that disconcerting 'thumb' from what feels like the differential on moderate stops, doesn't do it all the time, and better since I replaced the transmission mount.... so we'll see if topping off helps.
#18
What exactly is the differential seal called, like when I'm looking for it on AutoZone's, O'reilly's or Advance Auto's websites?
Is it difficult to change? Or is it as simple as removing a sort of "cap" and replacing the old seal and reassembling?
~Brian
Is it difficult to change? Or is it as simple as removing a sort of "cap" and replacing the old seal and reassembling?
~Brian
#20
I noticed some oil/grease on the garage floor where the rear end would be if the car were in the garage. I got under the car and took a glance and found the leak. Mine appears to be leaking from where the cover seals with the rear end.
It's my understanding the dealer likes to reseal the entire rear end at once. That's probably the right thing to do, but I'm wondering if I could just reseal what is leaking myself, at home. The cover looks fairly simple to remove, I'm assuming there's a seal there? What's the difference between a "seal" and gasket. The biggest problem is I don't have a torque wrench and can only tighten bolts by hand.
Hmm.....
It's my understanding the dealer likes to reseal the entire rear end at once. That's probably the right thing to do, but I'm wondering if I could just reseal what is leaking myself, at home. The cover looks fairly simple to remove, I'm assuming there's a seal there? What's the difference between a "seal" and gasket. The biggest problem is I don't have a torque wrench and can only tighten bolts by hand.
Hmm.....
Last edited by briankc86; 05-07-2011 at 03:33 AM.
#21
Not sure on the Benz since I have not had the pleasure doing that job yet, but, in my experience with other makes there may or may not be a gasket on the rear diff cover. I prefer to use a gasket, but I have also used "gasket maker" in the tube(permatex, etc.) and it works fine. Just be sure to clean or scrape any old gasket material off, clean it well and re-seal it up. I would see if you can find the correct torque setting for the bolts and tighten them in a star pattern similar to lug nuts on a wheel.
#24
Super Moderator
Joined: Jun 2008
Posts: 19,942
Likes: 183
From: Llandudno, Cape Town, South Africa
late 2009 CLK 350 Coupe Elegance, '65 Jaguar S Type wires
Yes indeed. The global racing fraternity including F1 survive on the stuff. Designed by Yamaha for aluminium engine & gearbox casings where no gaskets are used & vibration & some movement might be present. It's a pleasure to use. It works brilliantly & is easy to remove if you split the joint. Available from Yamaha dealers & online.
#25