More Info on KLEEMANN K23 Tunning Kit Needed

Erik - I might have pics of most of em, of course I've been through several hosting sites, so might not have access any more.
That spoiler does look good, from the limited pics I can see. Get that mystery mod installed - +5hp!

Hey, just remember, that was out of consideration of family. So despite my personal wishes (originally, I was going to order a manual tranny), I compromised for selfless reasons
Erik - I might have pics of most of em, of course I've been through several hosting sites, so might not have access any more.
That spoiler does look good, from the limited pics I can see. Get that mystery mod installed - +5hp!

Let me know about the pics.
Thanks,
Erik
Drex, I know how you love to be reminded. Oh, picking up my Ultraleggeras tomorrow at lunchtime from the powdercoaters.
Now waiting on the tires - should be early next week when they're on, and I can have fun with the car again.
Just picked up my newest mod....

I'm going to put them on in 2 weeks...just in time for the NJ meet. WooHoo!
Erik
Now waiting on the tires - should be early next week when they're on, and I can have fun with the car again. 
, when I think about what it would be like to have a manual on my car instead. Well, at leas
That's awesome, bro! Didn't know you were getting them powdercoated! That's even better sounding. Can't wait to see them. Hopefully, if everything goes as planned (knock on wood), I'll have some pics of mine on Sunday!
Just picked up my newest mod....

I'm going to put them on in 2 weeks...just in time for the NJ meet. WooHoo!
Erik
You just didn't stop with the mods, did you! These will go pretty darn well with your car.
The Best of Mercedes & AMG
You just didn't stop with the mods, did you! These will go pretty darn well with your car.
Like I said, after this, I'm done...well except for the shift knob...and the AVIC-Z1 if it's hackable.
Erik

Erik
Erik
Whatever happend to those dyno charts
?
Whatever happend to those dyno charts
?I think I missed the Saprissa coupe thread during my hiatus...maybe I'll look it up.
Erik
Like I said, after this, I'm done...well except for the shift knob...and the AVIC-Z1 if it's hackable.
Erik
youre a liar ... and you know it
keep us posted
And because you people wouldn't leave me alone...



As I'm told, you lose 30% from flywheel to wheel.
If the stock 189 is correct, then you should see around 132 on the dyno.
I pulled 153 on the dyno, which is about 219 corrected.
219 - 189 = +30 HP.
I was told I should get around +40, but if you figure I lost about 2-3 on the dyno for my heavier, larger rims, and 2-3 due to the RENNtech IC...it seems alright. This is all assuming the factory 189 was true to my car, which we have no idea if it is or isn't.
Torque was nearly perfect for the +40 they claimed.
If the stock 192 torque is correct, then it should be 134 on the dyno.
I pulled 162 on the dyno, which is about 231 corrected.
231-192 = +39 ftlbs torque.
Overall, I'm very happy with the setup and everything.
Erik
Last edited by tifosiv122; Apr 7, 2006 at 09:46 PM.
Erik
And because you people wouldn't leave me alone...



As I'm told, you lose 30% from flywheel to wheel.
If the stock 189 is correct, then you should see around 132 on the dyno.
I pulled 153 on the dyno, which is about 219 corrected.
219 - 189 = +30 HP.
I was told I should get around +40, but if you figure I lost about 2-3 on the dyno for my heavier, larger rims, and 2-3 due to the RENNtech IC...it seems alright. This is all assuming the factory 189 was true to my car, which we have no idea if it is or isn't.
Torque was nearly perfect for the +40 they claimed.
If the stock 192 torque is correct, then it should be 134 on the dyno.
I pulled 162 on the dyno, which is about 231 corrected.
231-192 = +39 ftlbs torque.
Overall, I'm very happy with the setup and everything.
Erik
.flip
Here's my dyno for comparison - though obviously my hardware is 1/2 different (heh) from Eriks. Alas, I too suffer the heavy wheel loss
. The before dyno was w/ just the Kleemann pulley kit, the after dyno w/ prototype CarLAB headers.
Last edited by mig888; Apr 8, 2006 at 05:30 PM.
pugguy2001 - yes, I can feel the power off the line. I felt more off the line power before the headers, with the headers I feel more power from 3-5K.
mig888 - I was told Mustang dynos show lower #s then Dynojet one's.
Outland - I'm only going by what i was told.
c230 o5 - Did you get the black centercaps or the silver B's? My ebay seller said he ran out of black stars and sent Bs and would send black stars when he gets more in stock. I didn't want to roll with Bs and I didn't want to have to remove my rims just to put the centers in and I didn't want to go without centers so I had the body shop paint the silver ones. It cost me $40 extra, but I had peace of mind.
Erik
Erik



