When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2017 GLA 250, 2011 C63 P31 (p30 w/ lsd) (in repair), 2005 C230 Sport Eurocharged, 2003 C320~sold
2003 C320 Sport
Hey all wanted to share my new kicks -- Vossen CVT Sorry about the bad pics and dirty car but just got finished working on it :P
19x8.5 frt 235/35
19x10 rear 275/30 (yes they fit with no fender rolling/pulling/cutting but still stock height--will see once I drop it a little)
Original wheels were appx 23mm from rim to outside of fender and 39mm rear. New wheels flush frt and 4mm rear.
Just got a dual exhaust installed on the C230K, sorry for the phone camera pictures, super sunny outside.
Exhaust custom fabricated at a shop in Sacramento, CA (Muffler Tech on Florin Road). It uses magnaflow so a bit noisy inside, but overall, I'm happy. The tips are oval and as close to the stock tip as I could find.
Other Major Stuff:
-Lowered on H&R springs.
-Rims are being worked on and should get it on with new tires in November.
Other Minor Stuff:
- black grill, flat hood emblem, clear corners, 5k leds replacing all bulbs, trunk badge delete, trunk lip
Love the exhaust, looks great. That's almost exactly what I want to do to my 350!
I picked up a cf front lip from one of our sponshors here (Gary@Suvneer). It didn't come with any mounting hardware or any pre-drilled holes like some of the other members got, but it wasn't too hard to do it. I had a friend help.
The rear diffuser I got on ebay. At first I was sad because after doing the dual exhaust mod, there wasn't enough clearance to slide it in. I was planning on selling it but then I went back to the exhaust shop and told them about it and they rewelded it for me free. I was able to fit the diffuser in so the next thing was to actually install it. The material and fitment is pretty bad, just like what everyone said. I found a body shop that was able to install it for me. They used some heavy duty glue and had it clamped on for the weekend and used 2 bolts at the bottom left/right sides to secure it even more. I painted the bolts black so it wouldn't stand out too much. There was also a gap between the diffiuser and the bumper since they couldn't get it flush. I use some trim weather stripping to line the edges and fill the gap. Turned out pretty good.
Last edited by danny2slick; 11-25-2014 at 03:50 PM.
Reason: resized photos smaller
Tein springs, S-class tail lights, Eagle eye headlights, carbon fiber roof and rear spoiler, black vinyl roof wrapped by Don Nuygen, E55 AMG wheels finished in anthracite gray, led interior and license plate light conversion and a turnt up europlate for fun(it's off center in the picture, but is now centered) . Windows 5% rear, 15% front, Airblue 80% front windshield.
Next mods: Illuminated side sills, euro license plate trunk insert, eisenmann exhaust, sport front and rear bumper, euro impact strips, ecu tune, intake, coilovers
Last edited by lawrencecheng; 12-12-2014 at 09:57 PM.
I picked up a cf front lip from one of our sponshors here (Gary@Suvneer). It didn't come with any mounting hardware or any pre-drilled holes like some of the other members got, but it wasn't too hard to do it. I had a friend help.
The rear diffuser I got on ebay. At first I was sad because after doing the dual exhaust mod, there wasn't enough clearance to slide it in. I was planning on selling it but then I went back to the exhaust shop and told them about it and they rewelded it for me free. I was able to fit the diffuser in so the next thing was to actually install it. The material and fitment is pretty bad, just like what everyone said. I found a body shop that was able to install it for me. They used some heavy duty glue and had it clamped on for the weekend and used 2 bolts at the bottom left/right sides to secure it even more. I painted the bolts black so it wouldn't stand out too much. There was also a gap between the diffiuser and the bumper since they couldn't get it flush. I use some trim weather stripping to line the edges and fill the gap. Turned out pretty good.
How did you go about getting the front lip? I see them online, but they all tend to be for the C32's
Thanks for the reply, Gary! Only problem is I have a stock C320. That's why I haven't been able to buy one online, they all fit the C32 front bumpers only.