SPARKED!!!
#1
Senior Member
Thread Starter
Join Date: Sep 2006
Location: FLORIDA
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
2003 C240
SPARKED!!!
Thought I'd share..........
Went to Midas today to get an LABOR estimate for spark plug install. I have the plugs.
They wanted $270.00 for install w/c I think is too much. 3.5 hrs of labor.
Anyway I found another mechanic who will do it for $130.
Anybody know the plug torque setting for 03 c240? Is this correct? 15-22 ft.lbs./20-30 Nm.
Went to Midas today to get an LABOR estimate for spark plug install. I have the plugs.
They wanted $270.00 for install w/c I think is too much. 3.5 hrs of labor.
Anyway I found another mechanic who will do it for $130.
Anybody know the plug torque setting for 03 c240? Is this correct? 15-22 ft.lbs./20-30 Nm.
Last edited by danev6972; 02-23-2010 at 08:12 PM.
#4
Senior Member
Thread Starter
Join Date: Sep 2006
Location: FLORIDA
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
2003 C240
Wish I had the time. I'll get the plugs done tomorrow.
#5
Senior Member
Thread Starter
Join Date: Sep 2006
Location: FLORIDA
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
2003 C240
Where in sarasota are you?...I'm in north port(sarasota county) my wife used to live there and worked in doctor's hospital.
#6
Super Moderator
sorry about your father. make sure the mecanic doesnet over tighten the plugs. also make sure to get all 12 back so that you know he did his job. i wonder if the dealer actually did all 12 on my car i have heard the cylander 3 and 6 are a *****. (i asume that the cylanders at the back of the engine go 123 down the driverside and 456 down pasanger side. or does it alternate sides? either way the 2 closest to the firewall.)
Trending Topics
#8
Senior Member
Thread Starter
Join Date: Sep 2006
Location: FLORIDA
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
2003 C240
Thanks all. Yes I got the old plugs back...I didnt even have to ask him for it. I left a note for him about the torque.
Actually the guy who did it is a Mobile mechanic.He goes to your home/business.
He is local and has 28 yrs experience foreign/Domestic. He worked on my car at home while I was at work...my wife was home of course. Total charge was $137. Better than midas' $270.
He also quoted me on the following:
Press axle bearing $48
Rear wheel bearing 1 side; $280
Steering column & overhaul: $384
Here is a pic of the old plug removed. Plugs had 74000 mi on it.
Replaced with BOSCH SUPER PLUS YTTRIUM
Actually the guy who did it is a Mobile mechanic.He goes to your home/business.
He is local and has 28 yrs experience foreign/Domestic. He worked on my car at home while I was at work...my wife was home of course. Total charge was $137. Better than midas' $270.
He also quoted me on the following:
Press axle bearing $48
Rear wheel bearing 1 side; $280
Steering column & overhaul: $384
Here is a pic of the old plug removed. Plugs had 74000 mi on it.
Replaced with BOSCH SUPER PLUS YTTRIUM
Last edited by danev6972; 02-24-2010 at 07:17 PM.
#10
#12
#13
Senior Member
Thread Starter
Join Date: Sep 2006
Location: FLORIDA
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
2003 C240