Another **DIY** By Evolved8: W203 Rear Diffuser Install Pictures+10 Easy steps
Subscribe
MBWorld Fanatic!
looks mean man...+1 on getting rid of the amg badge.
Those carbon diffusers say for the Amg bumper only so Iam pretty sure it will not work
Newbie
Do they sell those carbon diffusers for a CLK 500 with an AMG bumper? If so do you no part numbers or where I can get one? Thanks
MBWorld Fanatic!
Quote:
**NOTE black Mercedes symbol on the way and AMG badge is gone!!**
looks great, and exellent DIY ! thanks manOriginally Posted by Evolved8
UPDATE 8/24/2010 quad exhaust is done and i tinted the Taillights.Thanks to my friends at IPS Motorsports they hooked me up with a 2.5 stainless system.**NOTE black Mercedes symbol on the way and AMG badge is gone!!**
Member
Looks great man thanks for the info, i want t get mine done in the next couple weeks.
You said this was an ebay item, can I ask which vendor you went with? I dont want to buy a cheap or insuffcient fit and yours looks spot on.
You said this was an ebay item, can I ask which vendor you went with? I dont want to buy a cheap or insuffcient fit and yours looks spot on.
MBWorld Fanatic!
C230 Mulac
MBWorld Fanatic!
close
Dec 24, 2017
Beautiful work! Thanks for the DIY, I just got my brabus 4-tip and was thinking about how to modify the bumper and stumbled upon this thread. This looks like the best way to do it. Once again, I appreciate the pics and instructions! 
Banned
Quote:
Anthonyy,
Yes AMG badge, For I have the AMG sport package on my car.
Originally Posted by Evolved8
I sure hope not!!Anthonyy,
Yes AMG badge, For I have the AMG sport package on my car.
Very nice.. Remove the AMG badge at once! Didn't see your other post.. Car looks way better!
**** i think i want quad exhaust nowww
Thank you for the fantastic write up! Would you mind telling me exactly which two part epoxy you used?
Senior Member
Good Show
Quote:
Thanks, And I used LockTite 2 part Epoxy and left it clamped for 24 hours.Originally Posted by wawy
Thank you for the fantastic write up! Would you mind telling me exactly which two part epoxy you used?
Quote:
Thanks BroOriginally Posted by c240DUDE
Great job! Props to you man!
Quote:
Originally Posted by mmaz03
Looks awesome. Quads remind me of an E46 M3.
Quote:
Originally Posted by Outkasted24
Good Show
Super Member
Thanks for the write up. Does it really have to take one to two days? I'm the most impatient guy on the planet haha
Thanks. Just curious How much of the LockTite 2 part Epoxy you had to use on the diffuser?
Newbie
stupid question. :p
carbon diffuser
will this fit a clk500 from 2003
it looks the same bumper.
carbon diffuser
will this fit a clk500 from 2003
it looks the same bumper.
Senior Member
these tails look SIICCCKKK!!!!! I WANT A PAIR OF THEMM1!!!!!11!!!
Junior Member
this is a great write up! your car looks amazing!
and new rear pics? please share!
and new rear pics? please share!
Junior Member
Hey could anyone chime in on this.
I have eisenmann exhaust and today I went to lower the exhaust enough so I could Just clear the diffuser, even then I only have about. 25 inch on left tip and less than. 25 inch on right tip. (dual tip)
Would this melt the diffuser?
Should I get cool tape, or maybe go back make the exhaust stick out further away from the car (so tips aren't so hot and close to the diffuser) . As it can't go any lower.
Thanks.
I have eisenmann exhaust and today I went to lower the exhaust enough so I could Just clear the diffuser, even then I only have about. 25 inch on left tip and less than. 25 inch on right tip. (dual tip)
Would this melt the diffuser?
Should I get cool tape, or maybe go back make the exhaust stick out further away from the car (so tips aren't so hot and close to the diffuser) . As it can't go any lower.
Thanks.
