Don Nguyen | **Vinyl Roof Wrapping Services + Stickers/Graphics and more!**
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I do not have pre cut stuff for those. It's fairly easy enough to trim out though.
I guess if next time another C230 comes by to have it done, I can cut it and make a template for one if there's enough interest in it.
-Don
I guess if next time another C230 comes by to have it done, I can cut it and make a template for one if there's enough interest in it.
-Don
Senior Member
Joined: Mar 2003
Posts: 448
Likes: 4
From: San Antonio, TX
'11 SL550 - '08 ML350
Question on 3M Di NOC. At some point, the film would need to be removed for replacement or change in look. How easy or hard is it to remove once it has been on for months or years? What condition is the paint left in?
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Just posting up some more picture requests. Sorry if it takes a while to get to them all, since there's a lot of requests, and I go in order of the requests made. I'll eventually get to all of them.
Vinyl wrapped the roof and hood of this VW MkV GTI with the 3M di-noc carbon fiber material (did his roof 6 months prior and he finally decided to get his hood done as well):
-Don
donathon@gmail.com
Vinyl wrapped the roof and hood of this VW MkV GTI with the 3M di-noc carbon fiber material (did his roof 6 months prior and he finally decided to get his hood done as well):
-Don
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Been having the owner of this car telling me to post pictures of his car up, so I skipped ahead and did his pictures for him first 
Kind of a kill two requests in 1, as people have been asking me to take a bit more pictures at certain/various angles for them, so here you go to those who asked.
Some more pictures of the 3M Carbon Fiber Di-Noc material that I used to vinyl wrap the roof of this E46 3 series.
-Don
donathon@gmail.com
Kind of a kill two requests in 1, as people have been asking me to take a bit more pictures at certain/various angles for them, so here you go to those who asked.
Some more pictures of the 3M Carbon Fiber Di-Noc material that I used to vinyl wrap the roof of this E46 3 series.
-Don
donathon@gmail.com
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Tinted the tails on this C63, vinyl'd his window trim with matte black to cover up the chrome window trim, and wrapped/blacked out his amber bumper reflector.
-Don
donathon@gmail.com
-Don
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Tired of white car after white car with black roofs yet? Here's a Kia Forte that I vinyl wrapped the roof in gloss black. Pretty cool little car and a nice change of pace of all the euro/white cars.
-Don
donathon@gmail.com
-Don
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Vinyl wrapped the rear trunk on this Subaru with the 3M Di-Noc carbon fiber material. Took a before picture of the trunk with the holes and the after once the trunk was wrapped. Note, it may or may not show up in the pictures, but there will still be slight impressions of the holes where the vinyl is covering over.
Hopefully these pictures will answer many people's questions of how well vinyl covers holes that I've been asked.
-Don
donathon@gmail.com
Hopefully these pictures will answer many people's questions of how well vinyl covers holes that I've been asked.
-Don
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Tinted the headlights, tail lights, mirror lights, fog lights, and some other misc items on this ML350:
-Don
donathon@gmail.com
-Don
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I've had people ask if I can vinyl wrap hard tops and just how flexible my vinyl is...
Let me know if this answers your questions, and if you have any others
-Don
donathon@gmail.com
Let me know if this answers your questions, and if you have any others
-Don
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Vinyl wrapped the hood of this Acura RSX in the 3M di-noc carbon fiber vinyl. Don't mind the dusty marks/shadows. Forgot to clean it off before taking the pictures.
Just to be clear, since I know I'll have some people ask me if I can wrap their hoods. The material is not wide enough to wrap/do most hoods, except on smaller cars, such as this RSX. If you're interested in getting your hood wrap, measure your hood beforehand and give me the measurements of your car, so that way I can determine if it'd be possible or not.
-Don
donathon@gmail.com
Just to be clear, since I know I'll have some people ask me if I can wrap their hoods. The material is not wide enough to wrap/do most hoods, except on smaller cars, such as this RSX. If you're interested in getting your hood wrap, measure your hood beforehand and give me the measurements of your car, so that way I can determine if it'd be possible or not.
-Don
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Vinyl roof wrapped this R35 GTR's roof with some 3M Di-Noc carbon fiber vinyl, and also did the center of his rear spoiler.
Let me know what you guys think.
-Don
donathon@gmail.com
Let me know what you guys think.
-Don
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Is this a sign that I should do an east coast tour?
http://www.southwest.com/landing/hal...OHALWOW101026#
http://www.southwest.com/landing/hal...OHALWOW101026#
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Vinyl wrapped the roof of this BMW E92 M3 in the carbon fiber 3M di-noc material.
Just to avoid any confusion, his antenna was painted matte black, not wrapped. Also, it was only placed on there temporarily for pictures, hence why you can see a gap between the antenna cover and roof in some of the pictures.
Let me know what you guys think.
-Don
donathon@gmail.com
Just to avoid any confusion, his antenna was painted matte black, not wrapped. Also, it was only placed on there temporarily for pictures, hence why you can see a gap between the antenna cover and roof in some of the pictures.
Let me know what you guys think.
-Don
donathon@gmail.com
