M112 Part Out
Thread Starter
Former Vendor of MBWorld
Joined: Nov 2007
Posts: 717
Likes: 1
From: Dunellen, NJ
Chrysler Crossfire
M112 Part Out
Putting my car back to stock. Here are the parts that will fit any C240/C320.
-Race ported intake manifold with thermal coating. This is for power in the 3200RPM and up range, not recommended for a DD unless you don't mind the TQ loss: 550.00 plus your stock one, or 850.00 and you keep yours
-Adjustable Camber Arms, again just on for photoshoot: 165.00
-Fuel Rail with Defi Fuel Pressure gauge hook up and Gauge: 350.00
-Upgraded Injectors (about 250 miles on them): 280.00
-Catch Can (not sure where you would mount this as it was in my stock battery location when I relocated it): 200.00
-Race ported intake manifold with thermal coating. This is for power in the 3200RPM and up range, not recommended for a DD unless you don't mind the TQ loss: 550.00 plus your stock one, or 850.00 and you keep yours
-Adjustable Camber Arms, again just on for photoshoot: 165.00
-Fuel Rail with Defi Fuel Pressure gauge hook up and Gauge: 350.00
-Upgraded Injectors (about 250 miles on them): 280.00
-Catch Can (not sure where you would mount this as it was in my stock battery location when I relocated it): 200.00
Thread Starter
Former Vendor of MBWorld
Joined: Nov 2007
Posts: 717
Likes: 1
From: Dunellen, NJ
Chrysler Crossfire
