How to install JBSpeeds LED license plate fixtures?
sonic tunning has the full fixture for our cars.
http://www.sonictuning.com/lights/me...late-lamp.html
TYVM
The Best of Mercedes & AMG
! lol




Please let me know how they work..ie...brightness, flickering, dash errors etc, pics would be helpful too.

Pop the lil clips out all around until you can fold the liner down like shown (make sure you unplug the emergency escape button thing)

Use your 11/32 head to unbolt this. This will allow you to remove the license plate insert.

Usint a flat head and a paper towel/tape etc slowly pop this off...I believe there are 6 clips, 4 on top and 2 on bottom. Just slide it around and keep prying its plastic so you can be a lil strong with it.

Once license plate cover is removed and liner is peeled back look on under until you see the back end ofthe fixture and pull out the power. At this point I recommend testing the new fixture before going any further now that you can plug it in.

Once you pop it out it should look like this.

To pop them out there are push clips on the left side of each fixture. You might be able to use your finger, if not use something to push on and down on it to push the fixture out.
After this snap in the new fixtures, plug in, and reassemble! Congrats!




