phister

got some things sitting at my house that I still need to install and waiting for some to come in =) Plus going to push the limits of my wheel setup... new specs coming in January and might get a second setup too.

a3 german

have you yellow fog lights?

your car looks great

phister

Yeah yellow fogs for now. I switch back and forth with 3k and 5k temps Lol

phister

OK finally called up CCW and ordered my rear lips to push them to 11 in back and moving rear lips to front to get 10 in front so now i'll be at 18x10 and 18x11 =)

been on a 11 day straight work schedule so after this week I'll finally get to add my other parts on the car and order a few other things. Going to work on the B5 S4 this year so I'm not going to do much to the w203 this year, maybe some VIP interior stuff. Tearing the Audi engine apart right now already and ordered a RaceTec front mount already. Post pics with new wheel setup once I rebuild the barrels.

Stuka Bomber

Just read through about 30 pages of your thread (Don't tell my boss) and have a few questions.

I know its a long shot, but do you still happen to have those smoked side markers? I saw you listing them several times but I never saw mention if they were sold are not.

How is that single intake tube working for you? Any noticable gains? Hows it sound? Happen to have a parts list for that? What did you do with your smog pump hose that goes to the intake tract? Was it worth the hassle?

Car looks fantastic.

I just left the world of Audi, my B5 just jumped timing 20k before the belt was due to be changed. I can't bring myself to scrap it, so she sits in the garage with a brand new 12 piece control arm kit, 4 new wheel bearings, and 4 new pads/ rotors lol.

tommy

Doing the auto to manual conversion, I'm sure.

Stuka Bomber

I have an entire 2.8 5spd parts car I'd sell for cheaper than a conversion kit. With new tires, bearings, exhaust, brakes, and control arms.....

phister

I'll get to the manual conversion later unless I can find it cheap somewhere. I kind of like having one manual and one auto especially during traffic or out on dates or long trips. Fixing to order parts to build up the engine, still deciding on my path for how I want to build the engine, been researching on audizine.

Good note is my rear lip from CCW comes in today so about to run 11" in back !!!! beast mode!!! going to see if I can pull the fender out even more, had to customize my fender roller so it can pull even more lol

phister

18x10 +2 and 18x11 +4 coming soon =)

Rear lip just came in

phister

18x10 +2 and 18x11 +4 coming soon =)

Rear lip just came in

EuroJDMBenzo

DAMMNN your cars lookin good!!! nice wheel setup

TruTaing

wtfs. Pulling off 10" up front is gonna be nuts. What kind of tires are you planning??

phister

215/40 front and 235/40 rear... probably tearing it apart this weekend or next. I have Audi torn apart too so I need a car drive lol gonna borrow my friends GS for a few days so I can do it. CCW already thinks I'm nuts cause they know the rear is a pain to pull and roll.

a3 german

I hope I'm wrong..but imo 10" in front will bee too much poke :/

TruTaing

I am imagining your car w/ fender flares or widened fenders right now....

phister

I might have my friends body guy do custom sheet metal flares but I'm going to push the limits of how much I can pull the fenders and might have to camber the front some. Gotta step the game up and go where others haven't yet. =) phase 2 coming into effect.

phister

I poke a lil right now but I really haven't pulled the front fenders much so I think I'll be ok once I pull and camber a lil.

phister

rebarrel and repaint done =)

tommy

Ahh, you always keep things interesting. Nice color (actually like it about as much as the color it replaced, so I'd call it a push ).

Too wide in front for me, but then again, you always go further than I would on these things. How soon til the rims are done again?

phister

I'm actually aiming for a second set of CCW. So hopefully by summer I'll have another set of wheels hehe. Don't think I'll ever give up these sets just add more to the collection haha

TruTaing

These are the 10s up front and 11s in the back?!? Need some close ups of the poke!

phister

Yup.. fronts poke pretty good but I haven't pulled the fronts yet and really haven't cambered it. Rears are camber pretty good and pulled a lil more but I'm going to do more.

phister

well FML I just ripped off my front lip lol oh wells I can finally put in my order for the custom APR front splitter now. Make the car sportier now. about to go into another phase for the car.

TruTaing

lol. About time. I didnt think your front lip would last as long as it did.

Keep up the awesome work - PS did you ever get your nactaducts + intake working?

tommy

Well, that sucks. Time to update the siggy with a new pic, btw.