What wheel/rim setup is this?
#3
#5
those are 18" SL500 wheels
18x8.5 +35
18x9.5 +40
http://cgi.ebay.com/ebaymotors/MERCE...item2c5bf3a837
Pretty good deal on these
http://cgi.ebay.com/ebaymotors/18-ME...Q5fAccessories
18x8.5 +35
18x9.5 +40
http://cgi.ebay.com/ebaymotors/MERCE...item2c5bf3a837
Pretty good deal on these
http://cgi.ebay.com/ebaymotors/18-ME...Q5fAccessories
#7
come on i am horrible at math and remember this
lets say the fuel door is 10 inches and 1 inch in picture and the wheel is 4 inches in picture so
1/10 X 4/W
And find W
W= 40
So the wheel would be 40 inches lol
Trending Topics
#9
well You could if you spent enough time doing it i was not serious about doing it to actually figure it out. but technically possible but in practice on that small of picture too easy to make a mistake.
come on i am horrible at math and remember this
lets say the fuel door is 10 inches and 1 inch in picture and the wheel is 4 inches in picture so
1/10 X 4/W
And find W
W= 40
So the wheel would be 40 inches lol
come on i am horrible at math and remember this
lets say the fuel door is 10 inches and 1 inch in picture and the wheel is 4 inches in picture so
1/10 X 4/W
And find W
W= 40
So the wheel would be 40 inches lol
I was teasing you. Phi FTW, I think I might have to buy 2 plane tickets now. One for Trey and one for Phi
#10
I'll take a 18 road trip to see you lol.... need to go to a meet with my ride But no funny business if you and Mike ride in the back seats I might have to put a black light back there so I can see if any love stains were left
#14
#16
youll need new lug bolts. I dont know the specs for the OEM SL500 lug bolts. but you'll have to use the ball seat radius from the SL500, shank length from the SL600, thread from your bolt (12mm x 1.5), and 17 Hex.
Also when you get the spacers for the rears you'll have to add the extra length of the spacer to the shank length. ie if you get 5mm spacers youll add 5mm to the shank length.
Also when you get the spacers for the rears you'll have to add the extra length of the spacer to the shank length. ie if you get 5mm spacers youll add 5mm to the shank length.