HELP!!w203 v6 engine cylinder diagram
Thread Starter
Junior Member
Joined: Mar 2007
Posts: 52
Likes: 0
From: bay area
v6c230ss
HELP!!w203 v6 engine cylinder diagram
Hey everyone, CEL popped on the wife's car. Brought it to a MB certified shop to get it checked out. Came back with...
MISFIRING(P0300)
MISFIRING OF CYLINDER 2: DAMAGES TWC(P0302)
MISFIRING OF CYLINDER 1: DAMAGES TWC(P0301)
MISFIRING OF CYLINDER 5: WORSENING OF EXHAUST EMISSON VALUES AFTER ENGINE STARTS(P0305)
Going to be replacing all of the sparks. Also will need to replace cylinder 1 & 2 ignition coil per TECH.
My question is...what is the layout of the spark plugs? Driver side obviously has 3 in-line from front to rear as well as the passenger side.
??Is it Driver side(front to rear):1,2,3??
??Is it Passenger side( front to rear):4,5,6??
PLEASE HELP!!!
THANKS IN ADVANCE
Tazilla
MISFIRING(P0300)
MISFIRING OF CYLINDER 2: DAMAGES TWC(P0302)
MISFIRING OF CYLINDER 1: DAMAGES TWC(P0301)
MISFIRING OF CYLINDER 5: WORSENING OF EXHAUST EMISSON VALUES AFTER ENGINE STARTS(P0305)
Going to be replacing all of the sparks. Also will need to replace cylinder 1 & 2 ignition coil per TECH.
My question is...what is the layout of the spark plugs? Driver side obviously has 3 in-line from front to rear as well as the passenger side.
??Is it Driver side(front to rear):1,2,3??
??Is it Passenger side( front to rear):4,5,6??
PLEASE HELP!!!
THANKS IN ADVANCE
Tazilla
Last edited by tazilla; Sep 19, 2011 at 10:56 PM. Reason: stupid : and "D" together made smiley face smh
Senior Member
Joined: Jan 2010
Posts: 283
Likes: 2
From: Mississauga, Ont.
2007 C280 4matic Avantgarde
Super Moderator
Joined: Jun 2008
Posts: 19,942
Likes: 192
From: Llandudno, Cape Town, South Africa
late 2009 CLK 350 Coupe Elegance, '65 Jaguar S Type wires
Good pic!
Please note for future reference that cylinder identification is stamped on/cast into the heads.
Also note from an OBDII perspective. Cylinder 1 is always in Bank 1
Please note for future reference that cylinder identification is stamped on/cast into the heads.
Also note from an OBDII perspective. Cylinder 1 is always in Bank 1
Last edited by Glyn M Ruck; Sep 20, 2011 at 11:32 AM.
