Spencer's c230 Evolution...
#26
Senior Member
^yup pretty much haha, just personal preference tho if you're okay with it then go for it! but i know most girls get reallllly annoyed by it hahaha
i never had any personal experience with magnaflow so i wouldnt be able to tell you, maybe someone can chime in!
i never had any personal experience with magnaflow so i wouldnt be able to tell you, maybe someone can chime in!
#28
Member
Thread Starter
I just want to get to know as much as possible before actually getting it installed next week
Never really thought about it, how many horses are we talkin??
#29
Super Member
Join Date: Jun 2010
Location: Los Angeles
Posts: 754
Likes: 0
Received 2 Likes
on
2 Posts
'13 F10 535i / '05 W211 E55
Came out a little big.. but you get the idea. More pics in my thead you can just click the picture below.
#30
Member
Thread Starter
So the way you piped it and the way rollnnn piped it is the way to not lose back pressure?
the way Arekux's c32 is set up, with the pipe fitted on the right of the spare, loses pressure?
Example
because to my knowledge my exhaust guy is doing Arekux's type of setup, no muffler + res, fitted in between the passenger side of the tire
I'll see forsure in a week!
#31
Super Member
Join Date: Jun 2010
Location: Los Angeles
Posts: 754
Likes: 0
Received 2 Likes
on
2 Posts
'13 F10 535i / '05 W211 E55
I was just looking through your thread, man your car is so clean! Nice job with everything
So the way you piped it and the way rollnnn piped it is the way to not lose back pressure?
the way Arekux's c32 is set up, with the pipe fitted on the right of the spare, loses pressure?
Example
because to my knowledge my exhaust guy is doing Arekux's type of setup, no muffler + res, fitted in between the passenger side of the tire
I'll see forsure in a week!
So the way you piped it and the way rollnnn piped it is the way to not lose back pressure?
the way Arekux's c32 is set up, with the pipe fitted on the right of the spare, loses pressure?
Example
because to my knowledge my exhaust guy is doing Arekux's type of setup, no muffler + res, fitted in between the passenger side of the tire
I'll see forsure in a week!
The C32 set up is perfectly fine also, no loss of pressure. A loss of pressure would only happen if the muffler on the left ran an outlet pipe all the way back around the wheel well instead of going between it and the bumper.
Yours should have no problems at all.
#32
Super Member
Yeah, just a dual though. 14815, and didnt delete the resonator. Here's what mine sounds like, m112 engine
http://www.youtube.com/watch?v=m_LxOULxLqc
http://www.youtube.com/watch?v=m_LxOULxLqc
#33
Member
Thread Starter
Yeah, just a dual though. 14815, and didnt delete the resonator. Here's what mine sounds like, m112 engine
http://www.youtube.com/watch?v=m_LxOULxLqc
http://www.youtube.com/watch?v=m_LxOULxLqc
I love the sound it makes at 0:37, nice
But yeah mines going to be a widepipe magnaflow+a res, no muff, and quad tips
Would that even pass a california smog test?
#34
Member
Thread Starter
Aha thanks man. Me and rollnnn have the same set up just minus the tips.
The C32 set up is perfectly fine also, no loss of pressure. A loss of pressure would only happen if the muffler on the left ran an outlet pipe all the way back around the wheel well instead of going between it and the bumper.
Yours should have no problems at all.
The C32 set up is perfectly fine also, no loss of pressure. A loss of pressure would only happen if the muffler on the left ran an outlet pipe all the way back around the wheel well instead of going between it and the bumper.
Yours should have no problems at all.
Thanks for your help! I'll keep you guys up to date
#36
Senior Member
#37
Member
Thread Starter
#40
Member
Thread Starter
#42
Member
Thread Starter
Yeah I was just looking around I really like these ones:
18' Amg Style Flat Black
Still lookin though
18' Amg Style Flat Black
Still lookin though
#47
Member
Thread Starter
I used to think it looked ugly with out the badges but after putting all that stuff on the back of my car, in person it really looks a lot cleaner when you take them off
Planning on making the hood emblem black now
Planning on making the hood emblem black now
#50
Member
Thread Starter
These 18 inch rims
I'm looking at, say I may require 5mm spacers so it doesn't touch my breaks..
Is that for front and back? or just front 5mm spacers
I'm looking at, say I may require 5mm spacers so it doesn't touch my breaks..
Is that for front and back? or just front 5mm spacers