Electrical Issues; SRS light / CD Changer / Remote Unlock
10-05-2012, 12:51 AM
#1
Junior Member
Thread Starter
Join Date: Dec 2007
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
C320
Electrical Issues; SRS light / CD Changer / Remote Unlock
Hello
A few days ago, my CD changer decided to break. I disassembled it and noticed one of the wheels was cracked in half, so it will no longer load CDs. Afterward, I noticed that the radio wasn't working (it was on, so no sound)
I attempted to reconnect the transfer casing for the fiber optic cable and I think the PCB cord (the thin cord) came loose, and caused the radio to not come on anymore; Also the SRS light is on, and I am getting intermittent no unlocks when I use my key to unlock it. It sometimes takes about 5 presses to unlock it.
I replaced fuse 64 in the front SAM, and I also replaced fuse 34 (the white fuse) in the driver side fuse box, however the SRS error and radio remain. Curious though, Fuse 64 in my front SAM is 15a, but the little fuse sheet from MB says it should be 10A (is this even correct?)
A few days ago, my CD changer decided to break. I disassembled it and noticed one of the wheels was cracked in half, so it will no longer load CDs. Afterward, I noticed that the radio wasn't working (it was on, so no sound)
I attempted to reconnect the transfer casing for the fiber optic cable and I think the PCB cord (the thin cord) came loose, and caused the radio to not come on anymore; Also the SRS light is on, and I am getting intermittent no unlocks when I use my key to unlock it. It sometimes takes about 5 presses to unlock it.
I replaced fuse 64 in the front SAM, and I also replaced fuse 34 (the white fuse) in the driver side fuse box, however the SRS error and radio remain. Curious though, Fuse 64 in my front SAM is 15a, but the little fuse sheet from MB says it should be 10A (is this even correct?)
Last edited by Monk; 10-05-2012 at 12:59 AM.
