AirRex Bagged 2005 C230 Sport **Lots of PICS**
#1
Junior Member
Thread Starter
AirRex Bagged 2005 C230 Sport **Lots of PICS**
Hello,
i actually did this install around mid september time frame but ive been to lazy to post this up. so here it is.
Full installation took me about 1 full day. Pretty easy to install but took me awhile because ive never worked on a mercedes before, ive been building hondas for about 12 years. I ran the hoses and power wire through the driver side underneath the carpet and put it through the firewall where the fuse box is. its a huge hole that mercedes just stuffed with foam.
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1567.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1568.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1569.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1570.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1571.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1574.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1575.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1576.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1577.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1578.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1579.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1580.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1581.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1582.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1583.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1584.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1585.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1586.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1587.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1588.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1591.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1592.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1595.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1596.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1597.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1598.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1600.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1603.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1604.jpg)
i know the front looks like it has possitive camber. its cause it did. but airrex sent me new lower mounts for the front and now im running about -1.5 camber in front. looks a lot better.
www.forjworks.com
www.airrexsuspension.com
thanks for looking!
i actually did this install around mid september time frame but ive been to lazy to post this up. so here it is.
Full installation took me about 1 full day. Pretty easy to install but took me awhile because ive never worked on a mercedes before, ive been building hondas for about 12 years. I ran the hoses and power wire through the driver side underneath the carpet and put it through the firewall where the fuse box is. its a huge hole that mercedes just stuffed with foam.
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1567.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1568.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1569.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1570.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1571.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1574.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1575.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1576.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1577.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1578.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1579.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1580.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1581.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1582.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1583.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1584.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1585.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1586.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1587.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1588.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1591.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1592.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1595.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1596.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1597.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1598.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1600.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1603.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1604.jpg)
i know the front looks like it has possitive camber. its cause it did. but airrex sent me new lower mounts for the front and now im running about -1.5 camber in front. looks a lot better.
www.forjworks.com
www.airrexsuspension.com
thanks for looking!
#5
Junior Member
Thread Starter
It's pretty much bolt on. A couple holes I had to drill a little bigger. But that's it.. Oo I never took a pic of the air management lol.. Ill do that when I get back to my computer later
Trending Topics
#11
Junior Member
Thread Starter
I believe I'm running -2.0 in the rear with barely tucking tire. But it will vary on how low you want to roll. Ride is pretty good feels like coilovers in my opinion u can adjust the dampening too.
#15
Is this suspension from a w204 fitted to a w203?
Hello,
i actually did this install around mid september time frame but ive been to lazy to post this up. so here it is.
Full installation took me about 1 full day. Pretty easy to install but took me awhile because ive never worked on a mercedes before, ive been building hondas for about 12 years. I ran the hoses and power wire through the driver side underneath the carpet and put it through the firewall where the fuse box is. its a huge hole that mercedes just stuffed with foam.
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1567.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1568.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1569.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1570.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1571.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1574.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1575.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1576.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1577.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1578.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1579.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1580.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1581.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1582.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1583.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1584.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1585.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1586.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1587.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1588.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1591.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1592.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1595.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1596.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1597.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1598.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1600.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1603.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1604.jpg)
i know the front looks like it has possitive camber. its cause it did. but airrex sent me new lower mounts for the front and now im running about -1.5 camber in front. looks a lot better.
www.forjworks.com
www.airrexsuspension.com
thanks for looking!
i actually did this install around mid september time frame but ive been to lazy to post this up. so here it is.
Full installation took me about 1 full day. Pretty easy to install but took me awhile because ive never worked on a mercedes before, ive been building hondas for about 12 years. I ran the hoses and power wire through the driver side underneath the carpet and put it through the firewall where the fuse box is. its a huge hole that mercedes just stuffed with foam.
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1567.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1568.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1569.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1570.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1571.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1574.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1575.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1576.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1577.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1578.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1579.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1580.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1581.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1582.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1583.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1584.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1585.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1586.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1587.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1588.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1591.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1592.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1595.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1596.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1597.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1598.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1600.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1603.jpg)
![](http://i185.photobucket.com/albums/x36/b18acrix/bagged/IMG_1604.jpg)
i know the front looks like it has possitive camber. its cause it did. but airrex sent me new lower mounts for the front and now im running about -1.5 camber in front. looks a lot better.
www.forjworks.com
www.airrexsuspension.com
thanks for looking!