S150 Android head unit installed - Page 2

Feb 2, 2016 | 12:31 PM

#26

Roger161

Junior Member

Joined: Jan 2016

Posts: 46

Likes: 0

From: Fremont, California

2005 C230 Sport

Quote:

Originally Posted by Viperns

Do the steering wheel buttons still work with this?

In his first post when he compared the Pros and Cons of the unit, he mentioned in the " Pros " section that it has steering wheel controls.

Feb 2, 2016 | 02:26 PM

#27

Crna Mechka

Super Member

Joined: Oct 2010

Posts: 587

Likes: 6

From: Boston

12 E350 4Matic Sport

Has anyone had success installing similar units in pre-facelift W203's (MY2004 and earlier)?

Seems like most people in this thread are working with MY2005 and up models.

For $150 I wouldn't even think twice, just have a feeling it is only or the newer models.

Dec 14, 2020 | 02:03 AM

#28

Hyunchul Kwon

Newbie

Joined: Dec 2020

Posts: 7

Likes: 1

From: South Korea

W212

Good morning. Greetings from beginners living in Korea.

I'm writing it with Google Translate. I love Google!!!
I own the W212 E220 Bluetec AV (16Y2M), which is not sold in the US.

This time, I installed a 12.5 inch Android.
The model name is N600 plus.

I installed it myself, but it was very difficult.
It was Korea during the cold winter season, so I worked in the underground parking lot for 6 hours.

Since it is a car with NTG5, I connected it with AUX-USB.
The 12.5-inch monitor has a Blu-ray coating, which is very unreadable.

When I looked around MBWORLD, they complained with me.
Some of you have peeled off the coating, and I want to do that too.

After installing and inserting 4G SIM, the Internet is good and I am very satisfied!!!

I'm trying to set up Android step by step.

Let me know if you have any tips.

See you again~ Thank you

Dec 27, 2020 | 02:05 PM

#29

Robert AMG

MBWorld Fanatic!

iTrader: (1)

Joined: Jan 2009

Posts: 1,106

Likes: 85

From: Lebanon

Cls63 & C32

Hello, i installed N400 MTK 1920*720 10.25" on cls63 2012 with ntg4.5, i have big issue that the control knob is not working, everything else is working good, i have change all configurations between A/B harness without success, i checked all connections for loose wires but all looks fine, this is canbus issue, there is 4 canbus wires, 2 of them working fine and the the 2 others which are cables A and B when connecting to the screen the knob stop working, i have search everywhere but could not found anyone with this issue, can someone help? anyone has the wiring diagram of the harness in the rear of the android screen?

Sorry wrong thread.

Last edited by Robert AMG; Dec 27, 2020 at 02:08 PM.

Reply Subscribe