Projector HID fog issues
Thread Starter
Junior Member
Joined: Nov 2012
Posts: 16
Likes: 0
c230k
Projector HID fog issues
Whats up guys, so i bought a w203 on here awhile back, getting ready for inspection upcoming i'm trying to fix my projector fogs. The driver side isn't turning on. I HAVE NOT changed the bulb yet but i don't think that is the issue as it would flicker when you first turn the fogs on.
More of my question is( pictures to come in the morning)
so from the HID there are two sets of wires, one to the harness one to the ballast. Between the ballast and the HID there was a black box, no markings at all. What is that and is it required to get the fog to turn on? I tried going from HID directly to ballast and that did not work so i'm a bit at a loss here at what to do....
Thank yall so much hopefully someone knows whats up. The member i bought it from use to be active on here maybe he will be able to chime in. (i can't remember his name)
More of my question is( pictures to come in the morning)
so from the HID there are two sets of wires, one to the harness one to the ballast. Between the ballast and the HID there was a black box, no markings at all. What is that and is it required to get the fog to turn on? I tried going from HID directly to ballast and that did not work so i'm a bit at a loss here at what to do....
Thank yall so much hopefully someone knows whats up. The member i bought it from use to be active on here maybe he will be able to chime in. (i can't remember his name)
