installed a AVIC Z130BT in my 2006 c230
Thread Starter
Newbie
Joined: Jan 2014
Posts: 9
Likes: 0
2006 mercedes benz c230 sport
installed a AVIC Z130BT in my 2006 c230
After installing a AVIC Z130BT in my 2006 c230 I realized that the unit powers up but produces no sound.. I don't have any speakers hooked up to the unit but rather to two aftermarket amps,,,,-anyone got any ideas about what might have been accidentally omitted during installation which might be causing this to take place???? Thanks in advance
Out Of Control!!
Joined: Jun 2004
Posts: 13,799
Likes: 3,229
2014 E63S; AMS 100 octane ECU dyno tune; EDOK TCU tune; BB intakes; sprintbooster
You have the pre outs on the avic connected to the amps... The amps are working? Have you tested the Amps with another RCA source?
Are there any settings to set the pre outs to active? Buried in a menu? What source are you trying to play? iPod or cd or fm?
Are there any settings to set the pre outs to active? Buried in a menu? What source are you trying to play? iPod or cd or fm?
Thread Starter
Newbie
Joined: Jan 2014
Posts: 9
Likes: 0
2006 mercedes benz c230 sport
No I haven't tested the amps as they were hooked up and working fine when i replaced the old deck and after try every source possible I then went through the menu but have had no luck finding anything relating to preouts
Out Of Control!!
Joined: Jun 2004
Posts: 13,799
Likes: 3,229
2014 E63S; AMS 100 octane ECU dyno tune; EDOK TCU tune; BB intakes; sprintbooster
If the amps are on and connected to the speakers the problem is the avic or your RCA cables
Last edited by PeterUbers; Mar 1, 2015 at 08:32 PM.
