*URGENT* 2002 Mercedes C240 RWD - Suspension maintenance *URGENT*
Thanks for everyone's help in the past. I know there are various posts about this but I wanted your first hand opinion.
I currently own a 2002 Mercedes C240 RWD that is in pretty decent condition (300,000km). Body wise it is starting to rust out however, once again my front suspension require maintenance. Fuel pump just went and it is at a specialty shop. Here's what is required to be replaced:
Front Lower Control Arm Left
Front Lower Control Arm Right
Front Thrust Arm Left
Front Thrust Arm Right
Rear Left Ball Joint
Right Ball joint.
The only decent brand I can find is Lemforder. My mechanic says nothing but OEM will last, however he would install aftermarket (lemforder) parts if I buy them but he mentions they will not last. What are your previous experiences with these parts, how long will they last? In the end, buying aftermarket will probably save me $500+.
Also I would like to know where I can buy Lemforder Thrust Arms as I can not seem to find these parts anywhere. I typically use www.rockauto.com and many sites don't know what Thrust arms are.
Am I better to save up and buy OEM? In this case I would have to also purchase upper control arms because the current ones are Lemforder. Let me know what you think is the best option, I do want to keep the car.
ps. all in all I'm looking at about $1000 aftermarket lemforder, $2200+ OEM
Regards,
Marco
Did it myself in May, had MB align and check it afterwards. No issues.
Upper and lower control arms were ~$400 shipped
https://mbworld.org/forums/clk-class...trol-arms.html
Last edited by ambit; Jul 2, 2015 at 04:24 PM.
I believe the 'thrust arm' they are talking about is actually the upper control arm. my dealer called it a 'torque strut'







