V1 Remote Install - Help
Thread Starter
Almost a Member!
Joined: Jan 2002
Posts: 29
Likes: 0
From: Aiken, SC
2001 Corvette Z06
V1 Remote Install - Help
I hardwired my V1 for the C32 today. Thanks for the help on where to hook up. I did the #7 fuse location in the trunk and went down the passenger side and put the little box for the phone wire under the passenger side glovebox. I then installed the remote unit in the ashtray.
Problem - I routed the wire up to the side of the console, but could not figure a way to hide the wire and come in the rear of the ashtray or the tray below the radio. Does anyone know how to get behind there without disassemblying the dash?
I mounted the V1 with a special mount off the passenger visor mount by the door. With the remote I do not need the unit close to me. Really looks pretty hidden there and works well.
Thanks for the help....
Problem - I routed the wire up to the side of the console, but could not figure a way to hide the wire and come in the rear of the ashtray or the tray below the radio. Does anyone know how to get behind there without disassemblying the dash?
I mounted the V1 with a special mount off the passenger visor mount by the door. With the remote I do not need the unit close to me. Really looks pretty hidden there and works well.
Thanks for the help....
