Multiple error codes with P2005
Thread Starter
Member
Joined: Jan 2007
Posts: 97
Likes: 4
From: Malaysia
W203 (2007), W120 (1962)
Multiple error codes with P2005
I had the P0171 code settled by changing the vent hoses. It was a major job even though the hoses and the valve were cheap.
My indie spent about 2 hours to get it all done.
After arriving at home and starting the car again, the ECL came on again. Went back to the workshop and this is the reading we got.
stored code
P2005
coolant temp sensor P0118/P0117
or minimum engine temp for lambda ctr 1 has not been reached P0125/P0116/P0119.
Could it be the MAF or some hose/wire connection loose when the indie fixed them back.
My generic code reader says P0113 - Intake air temp circuit high input.
The Live Data shows IAT of 50 F when the ambient temp is much higher, around 90 F.
Thanks, Shan.
My indie spent about 2 hours to get it all done.
After arriving at home and starting the car again, the ECL came on again. Went back to the workshop and this is the reading we got.
stored code
P2005
coolant temp sensor P0118/P0117
or minimum engine temp for lambda ctr 1 has not been reached P0125/P0116/P0119.
Could it be the MAF or some hose/wire connection loose when the indie fixed them back.
My generic code reader says P0113 - Intake air temp circuit high input.
The Live Data shows IAT of 50 F when the ambient temp is much higher, around 90 F.
Thanks, Shan.
Last edited by shan; Mar 23, 2018 at 10:26 PM. Reason: correction
