Annoying rattle in seatbelt assembly
08-18-2004, 04:08 AM
#1
Annoying rattle in seatbelt assembly
Has anyone experienced rattling in the driver seatbelt assembly? I noticed that the plastic cover attached to the door frame is very cheap and hollow. I tried to adjust the height of the seatbelt but the rattling continues. Very annoying.
Doug
Doug
08-18-2004, 07:18 AM
#2
Out Of Control!!
Two options:
have dealer look at it if it's still under warranty - that's what they're for
or -
it's either the cap is messed up, or the torx screw underneath is loose. First, make sure it's not the cap. If it's not, then take a flathead, pop it off, and check the screw to see if it's loose.
It shouldn't rattle, though.
have dealer look at it if it's still under warranty - that's what they're for
or -
it's either the cap is messed up, or the torx screw underneath is loose. First, make sure it's not the cap. If it's not, then take a flathead, pop it off, and check the screw to see if it's loose.
It shouldn't rattle, though.
08-18-2004, 03:39 PM
#4
Senior Member
Join Date: Apr 2003
Location: San Diego, CA
Posts: 472
Likes: 0
Received 0 Likes
on
0 Posts
'14 A6 3.0 TFSI
Mine has been doing the same thing for at least 6 mos. When I push on the plastic cover, the rattle stops. I'll have the dealer look into it when I get my sunroof fixed.
