Bi-X: W203/CL203 OEM Bi-XENON Upgrade, Auto-Levelling & Programming thread
#1353
Member
Join Date: May 2006
Location: 115 Az heat. and sa Pilipinas
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
2002 c 240
Originally Posted by slammer111
Ouch, mine was only $40CAD. The cheapest way is to tell the SA you need your "headlights reaimed".
They charged me for 1 hour labor, which costs, I think.. $80.00. I don't know why the SA charge me $112.00... maybe the change is for his lunch money...j/k
#1355
Super Member
Join Date: Aug 2005
Location: Toronto, Canada
Posts: 746
Likes: 0
Received 0 Likes
on
0 Posts
//WALD C320 Magnifique [sold], BMW Z4 3.0i 6spd[sold]
Bi Xenon HELP!
I was changing my high beam bulbs, but when i pushed the electricity connector in, i heard something was broken. I just realized that my its my bix holder! Now it doesnt stay in place, everytime i go over bump, my bixenon is going crazy, something is untight inside there. Do you guys know what it possibly be? Thanks in advance!
#1358
MBWorld Fanatic!
Join Date: Oct 2004
Location: NJ, NYC
Posts: 4,152
Likes: 0
Received 57 Likes
on
46 Posts
Something Slow
i had the same problem with my bix u have to find out if the ball joint is broken or is the projector adjusting rod is out of place... if the ball joint is broken well u got a big problem u have to contact steve for a repair kit. if the adjusting rod is out of place all u have to do is tryin to pop it back in to the socket and adjust the headlight adjuster meaning the black knob that u used to adjust the projector all the way downwards and everything should be fine.. pm me i can try to explain more.
look here hope this helps
https://mbworld.org/forums/showthrea...oose+projector
look here hope this helps
https://mbworld.org/forums/showthrea...oose+projector
Last edited by WaveyKat; 05-31-2006 at 04:02 PM.
#1359
Super Member
Join Date: Aug 2005
Location: Toronto, Canada
Posts: 746
Likes: 0
Received 0 Likes
on
0 Posts
//WALD C320 Magnifique [sold], BMW Z4 3.0i 6spd[sold]
Originally Posted by WaveyKat
i had the same problem with my bix u have to find out if the ball joint is broken or is the projector adjusting rod is out of place... if the ball joint is broken well u got a big problem u have to contact steve for a repair kit. if the adjusting rod is out of place all u have to do is tryin to pop it back in to the socket and adjust the headlight adjuster meaning the black knob that u used to adjust the projector all the way downwards and everything should be fine.. pm me i can try to explain more.
look here hope this helps
https://mbworld.org/forums/showthrea...oose+projector
look here hope this helps
https://mbworld.org/forums/showthrea...oose+projector
#1360
Super Member
Join Date: Aug 2005
Location: Toronto, Canada
Posts: 746
Likes: 0
Received 0 Likes
on
0 Posts
//WALD C320 Magnifique [sold], BMW Z4 3.0i 6spd[sold]
Originally Posted by WaveyKat
i had the same problem with my bix u have to find out if the ball joint is broken or is the projector adjusting rod is out of place... if the ball joint is broken well u got a big problem u have to contact steve for a repair kit. if the adjusting rod is out of place all u have to do is tryin to pop it back in to the socket and adjust the headlight adjuster meaning the black knob that u used to adjust the projector all the way downwards and everything should be fine.. pm me i can try to explain more.
look here hope this helps
https://mbworld.org/forums/showthrea...oose+projector
look here hope this helps
https://mbworld.org/forums/showthrea...oose+projector
#1361
MBWorld Fanatic!
Join Date: Mar 2006
Location: Boston
Posts: 6,665
Likes: 0
Received 4 Likes
on
3 Posts
2004 C32 ///AMG
Originally Posted by SEXSPHERE
Man it works! Thx a lot! It was the adjusting rod, i did as what you told me to and it worked. Its due to the poor installation of the bi xenon it self. Ill post some pics when i got home tonight.. I need to get them reinstalled again, wasted 150bucks from the poor installation last time.
i hope i didnt do that.
#1362
Super Member
Join Date: Aug 2005
Location: Toronto, Canada
Posts: 746
Likes: 0
Received 0 Likes
on
0 Posts
//WALD C320 Magnifique [sold], BMW Z4 3.0i 6spd[sold]
Originally Posted by rlee02135
what did you do wrong installing them?
i hope i didnt do that.
i hope i didnt do that.
#1363
Super Member
Join Date: Aug 2005
Location: Toronto, Canada
Posts: 746
Likes: 0
Received 0 Likes
on
0 Posts
//WALD C320 Magnifique [sold], BMW Z4 3.0i 6spd[sold]
i seemed to manage to fix the BiX but i couldnt adjust the bix itself.. Whats wrong with it? I turned it to the left, nothing happened. And i couldnt turn the adjuster to the right. I just changed my bulbs to 8000k, are those the problem? Or improper installation of the bulbs? Thanks.
#1366
MBWorld Fanatic!
Join Date: Oct 2004
Location: NJ, NYC
Posts: 4,152
Likes: 0
Received 57 Likes
on
46 Posts
Something Slow
Originally Posted by SEXSPHERE
Man it works! Thx a lot! It was the adjusting rod, i did as what you told me to and it worked. Its due to the poor installation of the bi xenon it self. Ill post some pics when i got home tonight.. I need to get them reinstalled again, wasted 150bucks from the poor installation last time.
You Are Welcome steve help me with mines so am just helping out a member hopefully everyone with the loose projector can be fix.
Last edited by WaveyKat; 06-02-2006 at 08:45 AM.
#1367
Super Member
Join Date: Aug 2005
Location: Toronto, Canada
Posts: 746
Likes: 0
Received 0 Likes
on
0 Posts
//WALD C320 Magnifique [sold], BMW Z4 3.0i 6spd[sold]
Originally Posted by WaveyKat
You Are Welcome steve help me with mines so am just helping out a member hopefully everyone with the loose projector can be fix.
#1368
MBWorld Fanatic!
Join Date: May 2004
Location: Portugal
Posts: 1,479
Likes: 0
Received 4 Likes
on
4 Posts
'08 CLK320CDI AMG// '13 E500 Coupe AMG// '17 E350d AMG
How many auto leveling sensors are in front and rear axle???
Its just one on the rigth side or there is two on each axle?
I'm thinking installing the auto-leveling future, I installed BIX but when I'm travelling with 4 people in the car all the other drivers start to flash on me, because my headligths are to high and are blinding them, but its only when I carry some lugage or two people in the back, not that oftem but, it sucks...
And like CitronC230K_03 sayed, it adjust also when driving uphills and downhills, when there is a road change, I have factory BIX on my wagon and its much better in the daily driver, since the roads here are not that flat
Its just one on the rigth side or there is two on each axle?
I'm thinking installing the auto-leveling future, I installed BIX but when I'm travelling with 4 people in the car all the other drivers start to flash on me, because my headligths are to high and are blinding them, but its only when I carry some lugage or two people in the back, not that oftem but, it sucks...
And like CitronC230K_03 sayed, it adjust also when driving uphills and downhills, when there is a road change, I have factory BIX on my wagon and its much better in the daily driver, since the roads here are not that flat
#1369
MBWorld Fanatic!
Join Date: Jan 2005
Location: Orange County
Posts: 2,848
Likes: 0
Received 15 Likes
on
15 Posts
2005 C Wagon (No snickering please!)
There are two sensors. One for the front, one for the rear. You also need some cables, mounting bits, and a dealers' computer to calibrate them.
#1370
MBWorld Fanatic!
Join Date: May 2004
Location: Portugal
Posts: 1,479
Likes: 0
Received 4 Likes
on
4 Posts
'08 CLK320CDI AMG// '13 E500 Coupe AMG// '17 E350d AMG
My only doubt was how many sensors for axle, because I'm listing the parts needed to get some prices, and for now, I don't think all system is expensive considering the benefits... +-190€ installing it myself
#1371
Former Vendor of MBWorld
Join Date: Jan 2002
Location: global traveller
Posts: 4,011
Likes: 0
Received 3 Likes
on
2 Posts
some slow@$$diesels
Originally Posted by gaiex
My only doubt was how many sensors for axle, because I'm listing the parts needed to get some prices, and for now, I don't think all system is expensive considering the benefits... +-190€ installing it myself
greetingz,
#1372
MBWorld Fanatic!
Join Date: May 2004
Location: Portugal
Posts: 1,479
Likes: 0
Received 4 Likes
on
4 Posts
'08 CLK320CDI AMG// '13 E500 Coupe AMG// '17 E350d AMG
I have 2 w203 here with factory BIX and used they're VIN to check some parts at EPC, and 2 sensors, respective holders and cables I have +-190€ including 21%vat and yes the 2 sensors cost 190€ but I have 30% discount at MB
Last edited by gaiex; 06-25-2006 at 03:49 PM.
#1373
Former Vendor of MBWorld
Join Date: Jan 2002
Location: global traveller
Posts: 4,011
Likes: 0
Received 3 Likes
on
2 Posts
some slow@$$diesels
Originally Posted by gaiex
I have 2 w203 here with factory BIX and used they're VIN to check some parts at EPC, and 2 sensors, respective holders and cables I have +-190€ including 21%vat and yes the 2 sensors cost 190€ but I have 30% discount at MB
greetingz,
#1374
MBWorld Fanatic!
Join Date: May 2004
Location: Portugal
Posts: 1,479
Likes: 0
Received 4 Likes
on
4 Posts
'08 CLK320CDI AMG// '13 E500 Coupe AMG// '17 E350d AMG
Originally Posted by MBenzNL
so that means that the wiring and brackets that you think you need only cost +- 9% of 190 euro which equals 17 euro? that is a killer deal - go for it!
greetingz,
greetingz,
Yes I'll go for it
PS: I have the sensors at 81,23€ each
Offtopic: What a terrible match hein STEVE, that referrie was a disgrace for football
Regards
#1375
MBWorld Fanatic!
Join Date: Jul 2005
Location: Sydney, Australia
Posts: 3,220
Likes: 0
Received 10 Likes
on
6 Posts
W203 slightly modified
Originally Posted by gaiex
All parts 231,81€ - 30% = 162,267+21%VAT =+- 196€
Yes I'll go for it
PS: I have the sensors at 81,23€ each
Offtopic: What a terrible match hein STEVE, that referrie was a disgrace for football
Regards
Yes I'll go for it
PS: I have the sensors at 81,23€ each
Offtopic: What a terrible match hein STEVE, that referrie was a disgrace for football
Regards
The front/rear axle diagram doesnt show cable connections.
I did this work on a car last week (W203 2006) and I can assure you that you will need more than a screwdriver to make the install.
At the very least one rear spring has to come out and how much would that tool cost ?