How to tell if you really have the Intelligent light system!!!
03-20-2009, 07:14 AM
#26
Out Of Control!!
Join Date: Sep 2005
Location: West Michigan
Posts: 18,414
Likes: 0
Received 5 Likes
on
5 Posts
2007 E63
Here's a copy of the press release of the ILS with pictures and diagrams explaining how it works.
http://www.worldcarfans.com/2060208....t-light-system
http://www.worldcarfans.com/2060208....t-light-system
03-20-2009, 06:21 PM
#27
Member
Thread Starter
Join Date: Feb 2009
Location: Netherlands, Haarlem
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
E200C-Fully loaded, Obsidian Black, ILS, Panoramic roof and some other bits and pieces.
Just to confirm that I do in fact have the ILS. I drove the car on a bend and had my friend watch my lights as I turned and he did see the lights move towards the bend itself.
So I think the ILS is activated above a certain speed and has nothing to do with the steering movement alone.
So I think the ILS is activated above a certain speed and has nothing to do with the steering movement alone.
03-20-2009, 06:32 PM
#28
Super Member
I saw an Audi A4 2009 model flashing high beam Xenon's.
I noticed that the models equipped with Xenon's do not have halogen high beam units. Has anyone noticed or know more about this?
I have ILS, at low speed below 40 km/h or when the car is not in motion, the cornering light function is activated.
The Active light system (steering input) is activated above 40 km/h, additionally, above 110 Km/h with no large steering input for 1km or above 130km, the motorway mode is activated, this extends the beam pattern and increases the power output from 35w to 38w.
I noticed that the models equipped with Xenon's do not have halogen high beam units. Has anyone noticed or know more about this?
I have ILS, at low speed below 40 km/h or when the car is not in motion, the cornering light function is activated.
The Active light system (steering input) is activated above 40 km/h, additionally, above 110 Km/h with no large steering input for 1km or above 130km, the motorway mode is activated, this extends the beam pattern and increases the power output from 35w to 38w.
Last edited by Uga Uga; 03-20-2009 at 06:49 PM.
