tanktube67

https://mbworld.org/forums/c-class-w...ighlight=frank
Post # 42
You can get the sheet metal from Home Depot
Tools needed a nibblers and regular 120v welder
It will be a lot cheaper to take the template to Speedway I'm sure they will make it for you.

rb23lb

since i already have nibblers, I am thinking i will just go to the shop to get the templates welded on once i prepare them at home...

so i am guessing this is how you did it:

1. cut out two ovals matching template shape from stainless steel
2. cut whole in center of each cut-out template for inner y pipe piece to lign up with/pass through...
3. insert template through fron of already installed exaust tip and push back until flush with inner pipe and aligned through hole.
4. weld from the inside to secure the template in place

is that how u did it? or am i completely off?

tanktube67

You got it.

rb23lb

Cool... One more thing, was it easier to weld the template through the front of the tip or the back of the tip?

tanktube67

Is easier from the front

rb23lb

cool, thanks again for these helpful tips....

also if i may ask, you eventually got rid of this setup and got an actual new exaust system? were you looking to gain actual performance from an exhaust and that is why you changed or did you get tired of the look of the faux quad tips after a while?

tanktube67

I wanted it something with a deferent look and deeper sound, and it work out perfect with my black out theme.

rawdawg69

Hello. If you know anyone interste in a quad diffusser, I removed the one off my c63 and replaced it with carbon fiber item is in excellent condition if you know of anyone, **rawdawg6915@yahoo.com

delirium

Looks great! $280 at the muffler shop seems steep to me just to cut & weld. I thought you can almost get some new magnaflow cans for that price.

rawdawg69

Anyone looking for quad tip diffuser or ram intakes, or rear window spoilers for the c300 or c350 have these items for sale. cheap..