03 c230 kompressor limp mode
Thread Starter
Newbie
Joined: Jan 2010
Posts: 7
Likes: 0
03 c230 kompressor
03 c230 kompressor limp mode
Hello all,
Like it says I have a 03 c230 kompressor and it keep going into limp mode. It happens in cruise on the freeway and in town. Turn it off and it's fine for a while. I have a Auto boss scanner and also a cheap scanner. Here are the codes from the Auto boss
1: P200b-04
2: P2021-02
3: P2022-02
4: P2017-02
5: P2015
6: P2033-01
7: C1022
8: C1024
Cheap scanner
1: P0141
2: P0414
3: P0448
4: P0445
5: P0075
I blew the tube going to the coolant tank. Replaced it and now I have a recurring Coolant visit workshop error. Check engine light is on. I can clear the codes and CEL will go out but will be on later. The car has no oil leaks with 81K miles. I have been on this site for a while, but just now reg. Anybody have any ideas on what this could be? I heard of oil wicking up wires and checked the comp under on the left side of engine and sure enough there is engine oil there. Where is the oil coming from? Will I need a whole new harness and computer? Is this even the problem?
Thanks for looking
Like it says I have a 03 c230 kompressor and it keep going into limp mode. It happens in cruise on the freeway and in town. Turn it off and it's fine for a while. I have a Auto boss scanner and also a cheap scanner. Here are the codes from the Auto boss
1: P200b-04
2: P2021-02
3: P2022-02
4: P2017-02
5: P2015
6: P2033-01
7: C1022
8: C1024
Cheap scanner
1: P0141
2: P0414
3: P0448
4: P0445
5: P0075
I blew the tube going to the coolant tank. Replaced it and now I have a recurring Coolant visit workshop error. Check engine light is on. I can clear the codes and CEL will go out but will be on later. The car has no oil leaks with 81K miles. I have been on this site for a while, but just now reg. Anybody have any ideas on what this could be? I heard of oil wicking up wires and checked the comp under on the left side of engine and sure enough there is engine oil there. Where is the oil coming from? Will I need a whole new harness and computer? Is this even the problem?
Thanks for looking
Last edited by twisted c230; Jan 11, 2010 at 07:44 PM. Reason: added more info
