Hey Guys I installed my DDM kit just fine, however on the driver side I noticed that there seems to be like an area that isnt producing any light. I know its hard to understand, but if you were driving the car and look at the light output on the road, you would see about a 3 foot area where it looks like the bulb outline shadows on the ground. I checked the housing and there was nothing in the way, so I was wondering if any of you guys ran into a problem like this. The bulbs can only go in one way right due to the notch locking it in place?

 

Many people, including me, have this problem.
Just learn to ignore it. It's not so huge that you always notice it.
HIDs + Halogen Projector = Not Great

 

Try rotating the bulb around until you get even light output. You can use the metal clamps and still lock the bulb out of its original designated slot. This is what I did to mine.