Don Nguyen | **Vinyl Roof Wrapping Services + Stickers/Graphics and more!**
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Surprisingly, this is becoming more of a common occurrence, even on fairly new cars (5-7 years old). I used to see this kind of issue more on Hondas and Acuras, but apparently a lot of black BMW E60 5 series have been showing up with similar issues in their paint. This black BMW E60 550 sedan had me wrap the roof of his car in my gloss black vinyl material to help cover up the oxidizing and fading factory paint. The gloss black wrap is a fairly close match to the gloss jet black finish of the BMW’s factory paint, making this a cheaper alternative to having to repaint the whole roof. The owner of this car came out to me in Anaheim Hills / Orange County from Oceanside / San Diego to have the vinyl wrap done on his roof.
Before:
After:
-Don Nguyen
don@wannaberacer.com
Before:
After:
-Don Nguyen
don@wannaberacer.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I think a lot of people believe that I only work on local cars, however, I actually have good amount of non-local or out of state customers as well who ship me parts to have wrapped. The most common items that I have people send to me to have wrapped are interior trim pieces.
For this particular non-local customer, they removed and shipped me their interior trim pieces to have me wrap it in the 3M Di noc matte carbon fiber vinyl material. The original finish was wood, which was a bit older and worn out, so the owner wanted to change up the look of his interior and clean it up at the same time. I only took pictures of the larger more complex pieces, just to show the level of detail that is involved in the wraps that I do.
-Don Nguyen
don@wannaberacer.com
For this particular non-local customer, they removed and shipped me their interior trim pieces to have me wrap it in the 3M Di noc matte carbon fiber vinyl material. The original finish was wood, which was a bit older and worn out, so the owner wanted to change up the look of his interior and clean it up at the same time. I only took pictures of the larger more complex pieces, just to show the level of detail that is involved in the wraps that I do.
-Don Nguyen
don@wannaberacer.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I do not get to post as many installed interior car wraps mainly because actually most of my interior wraps are from non-local members who ship me their interior trim pieces to wrap.
However, in this case, the owner of this E90 328i sedan came by to have me take care of every part of the process of the interior wrap for their car. Every piece that is being wrapped is removed from the car and individually wrapped. I take special care and attention to the rounded corners and edges of every piece, to make sure the vinyl will hold up over time.
For the interior of this car, we went with the 3M gloss carbon fiber finish, to give it that factory BMW carbon fiber interior look that’s typically available as an option or more commonly seen on E90 and E92 M3s. The owner of this car came out to me in Anaheim Hills / Orange County from near Mission Viejo to have the vinyl car wrap done on the interior.
I tried to take some pictures of the interior indoors and outdoors to give a better perspective of how the material looks in different lighting. However, some of the pictures didn’t come out as well as I had hoped, but hopefully you guys are still able to see the details of the wrap.
Before:
After:
-Don Nguyen
don@wannaberacer.com
However, in this case, the owner of this E90 328i sedan came by to have me take care of every part of the process of the interior wrap for their car. Every piece that is being wrapped is removed from the car and individually wrapped. I take special care and attention to the rounded corners and edges of every piece, to make sure the vinyl will hold up over time.
For the interior of this car, we went with the 3M gloss carbon fiber finish, to give it that factory BMW carbon fiber interior look that’s typically available as an option or more commonly seen on E90 and E92 M3s. The owner of this car came out to me in Anaheim Hills / Orange County from near Mission Viejo to have the vinyl car wrap done on the interior.
I tried to take some pictures of the interior indoors and outdoors to give a better perspective of how the material looks in different lighting. However, some of the pictures didn’t come out as well as I had hoped, but hopefully you guys are still able to see the details of the wrap.
Before:
After:
-Don Nguyen
don@wannaberacer.com
