Plz help, having a horrible time with diffuser install
Thread Starter
Member
Joined: Oct 2008
Posts: 147
Likes: 1
From: C-town and the Bridge
2008 C230
Plz help, having a horrible time with diffuser install
Im using the DIY from https://mbworld.org/forums/c63-amg-w...r-install.html
but it just doesnt want to go in. The diffuser is the old style from JBSpeed. It doesnt want to do tht final "pop" to sit flush with the bumper
but it just doesnt want to go in. The diffuser is the old style from JBSpeed. It doesnt want to do tht final "pop" to sit flush with the bumper
Super Member
Joined: Mar 2011
Posts: 955
Likes: 0
From: NNJ
'11 C350 '13 F150 lariat
exactly like tanktube said. I actually had to remove and reinstall first time cause the middle wasnt seated all the way. ends were tight the very middle was a hair sticking out. I reached underneath and help those clips kinda straight and friend pushed from back and it seated. It helped I had a lift too, on the ground is tough
Thread Starter
Member
Joined: Oct 2008
Posts: 147
Likes: 1
From: C-town and the Bridge
2008 C230
I had a lift as well. I couldnt pull the bumper in the middle because the diffuser i have is much longer depth wise than the stock one.
Anyways it doesn't matter. The diffuser will not be installed. There were some defects that I came across of which I am waiting for a reply through PM.
Anyways it doesn't matter. The diffuser will not be installed. There were some defects that I came across of which I am waiting for a reply through PM.
