DIY Video "How to easily do a proper and clean install your HID kit on your W204"
Subscribe
thanks rival, hopefully i can get some shots of the whole car soon
Super Member
Quote:
Originally Posted by xXHotelCrazyXx
^If you connected your wires in that orientation, than it would work if you have the plug on the harness flipped as well (Which seems like thats why its working for you)
Quote:
what HotelCrazy said.
Gotcha... Thanks to both of you Originally Posted by AZN Optics
You can actually get to the fogs from the front by removing the grille as well. There's three screws holding the fog grille. No need to remove the bumper, but approaching it from both front and back makes things easier.what HotelCrazy said.
Junior Member
Newbie here from Hawaii!!! Nice work! Funny, I have a 03 Murano and have an aftermarket HID kit installed for my foglights. I mounted the ballasts in the same location on my MO as you did on your W204, looks like the bumper reinforcement bar. I went through the same steps to install...w/o removing the wheel, opened up the fender well plastic guard and accessed the light housings through the back of the fender. Actually, had no choice because there is absolutely no room to fit my hands through the top of the engine bay.
Thanks for the video walk through! Looks like I'll have to pick up a kit soon from AZN Optics.
Thanks for the video walk through! Looks like I'll have to pick up a kit soon from AZN Optics.
^Thanks!
Bump for the new comers
