2011 LED DRL installed - Having issue
#176
#182
was it this one APT M DAYTIME RUNNING CONTROL MODULE V2.0.0??? thx
#188
i just did mine yesterday!! wow.... it's a trip... hahah but it's so hot now!! i used the 35v 100uf from radio shack, they work perfectly fine
and here are some pics of the finish product! =) and it's hooked up with the Fogs, not with the side markers...
Last edited by dadangman; 05-03-2012 at 04:53 PM.
#191
Okay guys, here are the part numbers. I have attached my parts.com list as I looked some up using their site and others I simply entered part numbers. The description that comes up when you enter the part numbers is much more vague than when you look the part up through their site.
Here they are:
LEDS (R/L)
221-820-17-56
221-820-18-56
BACKING PLASTIC MOUNT (R/L)
204-885-28-14
204-885-29-14
FRONT MESH GRILLS (R/L)
204-885-0053
204-885-0753
CHROME DECORATIVE MOLDING (R/L)
204-885-27-74
204-885-28-74
And a capacitor looks like this :
Note how that one says like 10v and 2000uf you want one that says 25v and between 50 and 150 uf
Hey Blue my order list looks a lot different than yours. Am I missing anything?
#194
After fighting with the local Mercedes dealer, i finally have a set of the plugs.
Blue00r6 .... do these in the pic appear to be what i should have been given?
I obviously didn't have a part number when i did the order and just described them to the people at the part's desk that i needed the plugs that go into the back of the DRL LEDs for a C300, and this is what they look like.
Part Number
2115451328 (it's shown upside down in the pic on the one plug side)
When i run that on Parts.com it says "Trimmer Plug", MSRP $5.25, Core $0.00, Price $3.72
Blue00r6 .... do these in the pic appear to be what i should have been given?
I obviously didn't have a part number when i did the order and just described them to the people at the part's desk that i needed the plugs that go into the back of the DRL LEDs for a C300, and this is what they look like.
Part Number
2115451328 (it's shown upside down in the pic on the one plug side)
When i run that on Parts.com it says "Trimmer Plug", MSRP $5.25, Core $0.00, Price $3.72
#196
#197
#198
if u get the right plugs, u just gotta cut off the fog connectors and wire it with the (new) plug that fits the DRL LED... If you go the fog replacement route instead of the side markers, then u have full control as if it was ur fogs. BUT.... if u put ur lights on automatic and u turn... the lights will flicker due to the dimming effect.
#199
if u get the right plugs, u just gotta cut off the fog connectors and wire it with the (new) plug that fits the DRL LED... If you go the fog replacement route instead of the side markers, then u have full control as if it was ur fogs. BUT.... if u put ur lights on automatic and u turn... the lights will flicker due to the dimming effect.
thx dadangman, plugs ordered
#200
yuppp anytime!!! and one tool i think is essential to the MOD...... http://www.harborfreight.com/variabl...ool-67537.html
goodluck
goodluck