2010 C300: DDM Tuning kit with no errors
#1
Newbie
Thread Starter
Join Date: Jul 2011
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
2010 C300 4matic, 2008 CLK 350 Convt, 2008 Corvette Z06
2010 C300: DDM Tuning kit with no errors
My mother drives a 2010 C300 4matic
I have a set of DDM Tuning H7 HID's that I took out of my BMW.
Since I have the BOE Module already I pulled a headlight and tried it.
No warning Lights or anything
My 2 main questions are :
it is a 35w kit is this fine to run on the factory light harness?
and ;
Will the HID bulb get too hot and melt the Projector Housing?
Searched around on here but could not find the answer to these two questions
thanks !
I have a set of DDM Tuning H7 HID's that I took out of my BMW.
Since I have the BOE Module already I pulled a headlight and tried it.
No warning Lights or anything
My 2 main questions are :
it is a 35w kit is this fine to run on the factory light harness?
and ;
Will the HID bulb get too hot and melt the Projector Housing?
Searched around on here but could not find the answer to these two questions
thanks !
#3
Newbie
Thread Starter
Join Date: Jul 2011
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
2010 C300 4matic, 2008 CLK 350 Convt, 2008 Corvette Z06
thank you ! also since you seem to be a vendor... what is the deal with installing an HID kit in a 08 CLK 350 w209 it seems u need some special clip or something?
also there is a small light deflector over the low beam bulb it seems like... worried that will melt.
also there is a small light deflector over the low beam bulb it seems like... worried that will melt.