new wheels, new pictures
#26
Super Member
Thread Starter
Join Date: Nov 2008
Location: CALIFORNIA
Posts: 730
Likes: 0
Received 1 Like
on
1 Post
2012 E350 RWD
![smash](https://mbworld.org/forums/images/smilies/smashfreak.gif)
*EDIT*
Forgot to add video in my earlier post lol. I didn't make this by the way.
http://vimeo.com/m/31027345
Last edited by itsLoonie; 10-25-2011 at 11:06 AM.
#28
Super Member
Thread Starter
Join Date: Nov 2008
Location: CALIFORNIA
Posts: 730
Likes: 0
Received 1 Like
on
1 Post
2012 E350 RWD
In the 2nd picture where I'm a bit higher, I still had the height adjuster on. In the 1st pic is after I completely took it out. I'm pretty much running on the spring without a pad rear. Like everybody says, its more sunk in the rear now since I went lower because of the negative camber. Looking to correct that with spacers or even reverse mount my LMs but that's about another 15mm on average which brings my rear from ET50 to about ET35
![EEK!](https://mbworld.org/forums/images/smilies/eek.gif)
#29
ET35 thats what I like to hear!!!!! Just have to stretch like whoa!!! I need coils but don't feel like spending 3k on H&R's right now....grrrr
Thanks for the quick response. Thinking about running ET45 up front and ET 40 out back...
Thanks for the quick response. Thinking about running ET45 up front and ET 40 out back...
#30
Super Member
Thread Starter
Join Date: Nov 2008
Location: CALIFORNIA
Posts: 730
Likes: 0
Received 1 Like
on
1 Post
2012 E350 RWD
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
#35
MBWorld Fanatic!
holy crap! I just noticed how stretched your tires are!
I don't like seeing a lip on the outside of the rim, it looks really odd and too extreme for my taste.
I'm still a fan of the BBS wheels.
I don't like seeing a lip on the outside of the rim, it looks really odd and too extreme for my taste.
I'm still a fan of the BBS wheels.
#38
Super Member
Thread Starter
Join Date: Nov 2008
Location: CALIFORNIA
Posts: 730
Likes: 0
Received 1 Like
on
1 Post
2012 E350 RWD
![Stick Out Tongue](https://mbworld.org/forums/images/smilies/tongue.gif)
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
![EEK!](https://mbworld.org/forums/images/smilies/eek.gif)
Thanks!
#39
![Frown](https://mbworld.org/forums/images/smilies/frown.gif)
#42
MBWorld Fanatic!
Join Date: Sep 2008
Location: Delaware
Posts: 1,331
Likes: 0
Received 9 Likes
on
8 Posts
2004 Mazda6, 1993 RX7
Really like the BBSs! But with that stretch, and that short a sidewall height, you need a volunteer to sit on the front of the hood, looking for sidewalk curbs and potholes ! ![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
.
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
.
#44
Super Member
Thread Starter
Join Date: Nov 2008
Location: CALIFORNIA
Posts: 730
Likes: 0
Received 1 Like
on
1 Post
2012 E350 RWD
Thanks, can't beat the classic LMs
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
So I know its been a while since I've updated on the wheels. I took them apart and reverse mounted them. They do have some corrosion I believe so I have to repolish (doing it myself). Been lagging since I don't have a lot of time.
I measured using a straight edge and indeed the offset will be well in the mid-high 20s for the front and low 30s for the rear. I don't remember the offset exactly but I believe it was +25F and +32R. It went down 17 for front and 18 for rear
![EEK!](https://mbworld.org/forums/images/smilies/eek.gif)
The lip is wider and bigger now which is why I reversed them. Do they fit? I test fitted them and the rears are perfect. The front I will be getting the wheel hub shaved about 3-5mm off so it looks flush like the rear. Like I said I barely have time so I've been lagging. Got all my products to polish them up but don't have the time. I'll update it once I got 1 wheel done
![Roll Eyes (Sarcastic)](https://mbworld.org/forums/images/smilies/rolleyes.gif)
#45
Senior Member
Join Date: Dec 2011
Posts: 387
Likes: 0
Received 0 Likes
on
0 Posts
2008 Mercedes C300
Looks really good bro. Personally, i think 19s would have been perfect but hey, to each there own. I completly fell in love with thLis scene not to long ago when i had my G35. I was in SoCal for 2 weeks (Newport Beach area) and just happen to hear about a show up in LA which happen to be a HellaFlush show. Was a blast, now im hooked and cant wait to get my C300 lookin right! Again, GREAT JOB, there are only a select few who really appreciate this!
#46
Super Member
Thread Starter
Join Date: Nov 2008
Location: CALIFORNIA
Posts: 730
Likes: 0
Received 1 Like
on
1 Post
2012 E350 RWD
Thanks, I appreciate it. Yea only a few are into this scene on these forums. Yea it's not a practical way but people have to remember everyone mods their car to their likings. I was looking for 19s but couldn't find any with the right wheel spec I was looking for. I will go 19s in my next set though. Already have my next wheel in mind
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
#47
Senior Member
Join Date: Dec 2011
Posts: 387
Likes: 0
Received 0 Likes
on
0 Posts
2008 Mercedes C300
Thanks, I appreciate it. Yea only a few are into this scene on these forums. Yea it's not a practical way but people have to remember everyone mods their car to their likings. I was looking for 19s but couldn't find any with the right wheel spec I was looking for. I will go 19s in my next set though. Already have my next wheel in mind ![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
#49
Member
Fantastic styling!!! BBS LM - legend and overall picture is very very nice, like it.
I am trying practically the same with 19th Carlsson 1/11 wheels
Front: 8,5 ET40 and 235/35/19, but should be 225 or even 215
Rear: 10 ET45 and 255/30/19, might change for 235 or 245
And lowered by H&R springs, approx -20 or something mm.
Thinking about airride constantly
I am trying practically the same with 19th Carlsson 1/11 wheels
Front: 8,5 ET40 and 235/35/19, but should be 225 or even 215
Rear: 10 ET45 and 255/30/19, might change for 235 or 245
And lowered by H&R springs, approx -20 or something mm.
Thinking about airride constantly
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)