Mobil Vs Shell
Thread Starter
MBWorld Fanatic!
Joined: Mar 2008
Posts: 3,714
Likes: 56
From: 1 hours drive north of Sydney Australia
2007 W204 220CDI Classic Sedan
Mobil Vs Shell
I am seriously considering changing the engine oil brand from Mobil 1 ESP 5w -30 to Shell Helix Ultra Extra 5w-30.
The reason is that the Mobil depot & Mobil Australian distributor do not offer service , it is not available at times & the 20 litre drums sealed tops leak & they arrive in a very dirty & dusty condition.
The Shell is cheaper & the seller keen to do business.
My question is , are the products equal in quality as far as my 220 CDI diesel ?. Are there any preferences ?.Which would be the most suitable to lengthen service life?
Both oils are MB 229.51.
Below are the specs :-
Typical Properties
Mobil 1 ESP Formula 5W-30
SAE Grade 5W-30
Viscosity, ASTM D 445
cSt @ 40ºC 72.8
cSt @ 100ºC 12.1
Viscosity Index, ASTM D 2270 164
Sulphated Ash, wt%, ASTM D 874 0.6
HTHS Viscosity, mPa·s @ 150ºC, ASTM D4683 3.58
Pour Point, ºC, ASTM D 97 -45
Flash Point, ºC, ASTM D 92 254
Density @ 15ºC, kg/l, ASTM D 4052 0.850
Typical Physical Characteristics
Helix Ultra Extra 5W-30
SAE Viscosity grade 5W-30
Kinematic Viscosity ASTM D 445
at 40°C mm2/s 67.9
at 100°C mm2/s 11.8
Viscosity Index ISO 2909 170
Density at 15°C kg/m3 ASTM D 4052 0.848
Pour Point °C ISO 3016 -39.0
These characteristics are typical of current production. Whilst future production.
Thank you .
JC
The reason is that the Mobil depot & Mobil Australian distributor do not offer service , it is not available at times & the 20 litre drums sealed tops leak & they arrive in a very dirty & dusty condition.
The Shell is cheaper & the seller keen to do business.
My question is , are the products equal in quality as far as my 220 CDI diesel ?. Are there any preferences ?.Which would be the most suitable to lengthen service life?
Both oils are MB 229.51.
Below are the specs :-
Typical Properties
Mobil 1 ESP Formula 5W-30
SAE Grade 5W-30
Viscosity, ASTM D 445
cSt @ 40ºC 72.8
cSt @ 100ºC 12.1
Viscosity Index, ASTM D 2270 164
Sulphated Ash, wt%, ASTM D 874 0.6
HTHS Viscosity, mPa·s @ 150ºC, ASTM D4683 3.58
Pour Point, ºC, ASTM D 97 -45
Flash Point, ºC, ASTM D 92 254
Density @ 15ºC, kg/l, ASTM D 4052 0.850
Typical Physical Characteristics
Helix Ultra Extra 5W-30
SAE Viscosity grade 5W-30
Kinematic Viscosity ASTM D 445
at 40°C mm2/s 67.9
at 100°C mm2/s 11.8
Viscosity Index ISO 2909 170
Density at 15°C kg/m3 ASTM D 4052 0.848
Pour Point °C ISO 3016 -39.0
These characteristics are typical of current production. Whilst future production.
Thank you .
JC
