what other wheel brands are out there or are the choices really this limited
#1
Member
Thread Starter
Join Date: Feb 2012
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
2009 Evo X 420 AWHP, 2012 C250 Sedan
what other wheel brands are out there or are the choices really this limited
i'm new to mb.. got a 250 sedan daily driver.. but dam.. the mod bug just can not be cured..
so i started looking at rims and suspension for some stance..
so far i've really only seen very few brands that have offsets and pattern in w204's range..
vossen(only 1 model in 19 concave).. forgestar (heard bad things).. vmr ( not really w204 fit).. replica amgs.. mandrus (looks blah)..
everything else i look at are either have wrong pattern or offset way off..
i have -20 offset on my evo currently from wheeldude.. so i hit him up and he was like sorry bud.. i have NOTHING that fits your c class..
+45-50 offset is something i've never heard of before..
maybe you guys can steer me into some brands that have c class fitments that i'm not aware off yet?![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
so i started looking at rims and suspension for some stance..
so far i've really only seen very few brands that have offsets and pattern in w204's range..
vossen(only 1 model in 19 concave).. forgestar (heard bad things).. vmr ( not really w204 fit).. replica amgs.. mandrus (looks blah)..
everything else i look at are either have wrong pattern or offset way off..
i have -20 offset on my evo currently from wheeldude.. so i hit him up and he was like sorry bud.. i have NOTHING that fits your c class..
![Frown](https://mbworld.org/forums/images/smilies/frown.gif)
+45-50 offset is something i've never heard of before..
maybe you guys can steer me into some brands that have c class fitments that i'm not aware off yet?
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
Last edited by silversx; 02-17-2012 at 07:01 PM.
#3
Member
Thread Starter
Join Date: Feb 2012
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
2009 Evo X 420 AWHP, 2012 C250 Sedan
#4
Member
Thread Starter
Join Date: Feb 2012
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
2009 Evo X 420 AWHP, 2012 C250 Sedan
#5
MBWorld Fanatic!
Join Date: Aug 2010
Location: New York
Posts: 1,019
Likes: 0
Received 0 Likes
on
0 Posts
2010 c350
You could run lower offsets a few guys are running et35 . The next set for me is gonna be et35 . Roll your fenders and stay with 18's and you should be ok .
#6
Member
Join Date: Dec 2011
Location: Long Island NY
Posts: 160
Likes: 0
Received 1 Like
on
1 Post
W204 2008 C350
I'm going through the same thing as you are OP. It's frustrating as hell looking for 18's in that offset. I don't want to run 19's with NY roads so I'm stuck on the hunt.
I too heard about Forgestars being a problem. (Unreliable manufacturing times, cracking..mostly 19's though)
Everything else.. well you hit the nail on the head.
I too heard about Forgestars being a problem. (Unreliable manufacturing times, cracking..mostly 19's though)
Everything else.. well you hit the nail on the head.
Trending Topics
#9
Member
Thread Starter
Join Date: Feb 2012
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
2009 Evo X 420 AWHP, 2012 C250 Sedan
#10
Member
Join Date: Jun 2011
Location: Northern Cali
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
2011 W204 C300 mm pano
Oh sorry missed the daily part and I am lucky that every where I drive has nice roads but I do worry when I am in unfamiliar places. Where are you located? Here in Cali I didn't even have to put on my winter summer rims this year cause of very little rain.
#12
Member
Thread Starter
Join Date: Feb 2012
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
2009 Evo X 420 AWHP, 2012 C250 Sedan
im more interested in the concave look.. which is what i have on my evo.. i used to have an IS lexus and I had deep dish ... kinda over that look
what other concaves are out there that fit out car besides vossen.. it seems like with such high offset.. it's hard to make it concave as much as low offset wheel.. which is a shame
what other concaves are out there that fit out car besides vossen.. it seems like with such high offset.. it's hard to make it concave as much as low offset wheel.. which is a shame
#13
Member
Join Date: Dec 2011
Location: Long Island NY
Posts: 160
Likes: 0
Received 1 Like
on
1 Post
W204 2008 C350
Check the thread of the AMG guy's. Lots of cool (albiet expensive) ideas for wheels.
Aftermarket Wheel thread
Aftermarket Wheel thread
#17
Member
Join Date: Dec 2011
Location: Long Island NY
Posts: 160
Likes: 0
Received 1 Like
on
1 Post
W204 2008 C350
I like how they look. The Bad I've heard about them:
Company is unreliable as far as manufacture times. Lots of delays way past the promised build time. Nothing to do with the Vendor themselves mind you as I've seen this complaint on the Bimmer forums as well. So you're better up grabbing a set IF they are already in stock!
I've read on more occasions than I'd like about them cracking. Mostly people rocking 19's so it's really no surprise there. Bigger wheels are more prone to cracking So I take those stories with a grain of salt. Personally, I'm not interested in 19's so there's that.
Customer service: Again, the company themselves don't seem to be willing to assist the customer with wheel flaws, cracks, etc. This is what I've read. No personal experience obviously. The only one of these things that concern me is the wait time. I'm impatient when I pay for something, I like a specified time of receipt. That's just me
Company is unreliable as far as manufacture times. Lots of delays way past the promised build time. Nothing to do with the Vendor themselves mind you as I've seen this complaint on the Bimmer forums as well. So you're better up grabbing a set IF they are already in stock!
I've read on more occasions than I'd like about them cracking. Mostly people rocking 19's so it's really no surprise there. Bigger wheels are more prone to cracking So I take those stories with a grain of salt. Personally, I'm not interested in 19's so there's that.
Customer service: Again, the company themselves don't seem to be willing to assist the customer with wheel flaws, cracks, etc. This is what I've read. No personal experience obviously. The only one of these things that concern me is the wait time. I'm impatient when I pay for something, I like a specified time of receipt. That's just me
#19
Senior Member
Join Date: Dec 2010
Location: Dix Hills
Posts: 440
Likes: 0
Received 1 Like
on
1 Post
2011 c300 4matic
I like how they look. The Bad I've heard about them:
Company is unreliable as far as manufacture times. Lots of delays way past the promised build time. Nothing to do with the Vendor themselves mind you as I've seen this complaint on the Bimmer forums as well. So you're better up grabbing a set IF they are already in stock!
I've read on more occasions than I'd like about them cracking. Mostly people rocking 19's so it's really no surprise there. Bigger wheels are more prone to cracking So I take those stories with a grain of salt. Personally, I'm not interested in 19's so there's that.
Customer service: Again, the company themselves don't seem to be willing to assist the customer with wheel flaws, cracks, etc. This is what I've read. No personal experience obviously. The only one of these things that concern me is the wait time. I'm impatient when I pay for something, I like a specified time of receipt. That's just me
Company is unreliable as far as manufacture times. Lots of delays way past the promised build time. Nothing to do with the Vendor themselves mind you as I've seen this complaint on the Bimmer forums as well. So you're better up grabbing a set IF they are already in stock!
I've read on more occasions than I'd like about them cracking. Mostly people rocking 19's so it's really no surprise there. Bigger wheels are more prone to cracking So I take those stories with a grain of salt. Personally, I'm not interested in 19's so there's that.
Customer service: Again, the company themselves don't seem to be willing to assist the customer with wheel flaws, cracks, etc. This is what I've read. No personal experience obviously. The only one of these things that concern me is the wait time. I'm impatient when I pay for something, I like a specified time of receipt. That's just me
#21
Member
Thread Starter
Join Date: Feb 2012
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
2009 Evo X 420 AWHP, 2012 C250 Sedan
Yea my thing with forgestar is that the build time can vary greatly and i'm not one to wait 16 weeks to order and then have them build it taking their sweet time.
For those that have forgestars ehat was the time frane for you to receive it?
For those that have forgestars ehat was the time frane for you to receive it?
Last edited by silversx; 02-18-2012 at 09:58 PM.
#22
MBWorld Fanatic!
The Nurbergrings and Interlagos are rotary forged liked the forgestar wheels. I think the weights are pretty similar at about 18 lbs for an 18" wheel so it comes down to design and price. TSWs are easier, quicker and cheaper to buy if you like the looks. Since they are a much, much bigger company, they may even back them a little better as well
#23
Senior Member
Join Date: Dec 2010
Location: Dix Hills
Posts: 440
Likes: 0
Received 1 Like
on
1 Post
2011 c300 4matic
i placed my forgestar order on black friday received them two weeks ago... so i see what you guys are saying about time, but i was patient so it did not matter that much to me. but everything else about there service was excellent.
#25
MBWorld Fanatic!
I have always been a non-lipped, five spoke kind of guy but thought these looked pretty good on the car.
http://www.flickr.com/photos/76231655@N06/6842412709/
http://www.flickr.com/photos/76231655@N06/6842412709/